Water filters
Filter cartridges
Reverse osmosis
Softeners & Iron Filters
Accessories & Parts
Soda makers
Bestsellers
Wholesale
Soda makers
BLOG
Kontakt
Services
PayU
Tips
FCPS5 waterRO GRAPHITE is a foam insert (polypropylene nonwoven) for mechanical water filtration. It effectively removes fine solid contaminants, including silt and sludge, present in well water and tap water. Thanks to its precision of 5 microns, it serves as a pre-filter, protecting more expensive inserts as well as the installation and fittings.
FCPS5 wodaRO GRAPHITE – 5 micron foam cartridge is an effective filter cartridge for mechanical water filtration, designed to remove fine solid contaminants such as silt, sludge, and sediment. It works well as a water filter in domestic installations, under-sink and inline filters, as well as a prefilter supporting a water filtration system, including a reverse osmosis filter and other treatment setups. The 5 micron rating effectively protects more expensive cartridges, the water installation, and fittings against premature wear.

The FCPS wodaRO GRAPHITE series cartridge has been designed to remove mechanical impurities from water, also referred to as sedimentary deposits. Its task is to capture fine solid fractions present in water that may reduce the performance of the entire filtration system and affect the durability of subsequent installation components.
The 5 micron filtration rating means the cartridge performs very well at retaining contaminants such as silt, sludge, and other fine sediment. It is a practical solution for both water drawn from a private well and municipal water, where impurities may appear during distribution.
This foam sediment cartridge is used wherever effective protection of subsequent filtration stages and the water installation is needed. It can operate in popular housings and systems used at home as well as in basic water treatment setups.
Thanks to this application, the cartridge helps reduce the risk of faster wear of more advanced and more expensive filtration media. It is therefore a practical element of the initial stage when the goal is effective water treatment and stable operation of the entire system.
The cartridge is made of high-quality foam, i.e. polypropylene nonwoven fabric. The material has been formed in a way that allows water to be filtered through the entire structure of the cartridge, not only on its surface. This design supports effective retention of mechanical impurities and enables efficient operation as a sediment cartridge.
Polypropylene used in this type of cartridge is a popular choice in filtration systems due to its good service resistance and effectiveness in separating solid sediment from flowing water.
A 5 micron rating is a solution for users who want to effectively capture fine mechanical contaminants before the next filtration stages. Such a cartridge works well as the first stage of protection in household systems, where not only water quality matters, but also the safety and durability of the entire installation.
Important: cartridge lifespan depends on the quality of the incoming water. With a higher level of mechanical impurities, replacement may be needed earlier than the maximum declared service period.
The FCPS5 wodaRO GRAPHITE cartridge works best as an element of preliminary mechanical filtration. Its regular replacement helps maintain effective sediment retention and protects the next filtration stages from excessive load.
This is especially important in installations using carbon, softening, iron-removal cartridges, or an osmotic filter. Retaining silt, sludge, and other sediment already at the beginning of the water flow path improves the operating conditions of the entire system.
In everyday use, it is worth checking the condition of the cartridge especially when the water comes from a well or when larger amounts of sediment periodically appear in the water supply network due to distribution.
Operating notes: the declared lifespan of up to 6 months applies to typical operating conditions. The actual service life depends on the quality of the incoming water and the amount of mechanical impurities.
| Parameter | Value |
|---|---|
| Cartridge height | 10'' |
| Cartridge diameter | 2,5" |
| Filtration rating | 5 micron |
| Lifespan | up to 6 months* |
| Pressure drop | 0,2 - 0,4 bar |
It is a cartridge for mechanical water filtration, designed to remove fine solid contaminants such as silt, sludge, and other sediment. It serves as a prefilter and protects subsequent components of the filtration system.
The cartridge retains fine mechanical impurities present in water, including silt, sludge, and other sedimentary deposits. Thanks to its 5 micron rating, it works well as an effective prefilter.
Yes. The cartridge is intended, among other uses, for water from a private well, where fine fractions of solid contaminants are often present. It can also be used for municipal water.
Yes, the cartridge can operate as a prefilter in systems such as a reverse osmosis filter, an osmotic filter, or a reverse osmosis system. Its task is to protect subsequent filtration stages from mechanical sediment.
The cartridge is used, among others, in under-sink and inline filters. It works well wherever effective mechanical filtration and protection of subsequent cartridges are needed.
The cartridge is made of high-quality foam, i.e. polypropylene nonwoven fabric. The material structure allows water to be filtered through the entire structure of the cartridge.
The cartridge lifespan is up to 6 months. The actual service time depends on the quality of the incoming water and the amount of contaminants present in the water.
The cartridge height is 10'', and the diameter is 2,5". These are important parameters when selecting the cartridge for the appropriate filter housing.
A sediment cartridge retains mechanical deposits at the very beginning of the filtration process. Thanks to this, it helps protect more expensive carbon, softening, and iron-removal cartridges, as well as the water installation and fittings themselves.
Wkład jest przystępny cenowo, co pozwala mi na regularną wymianę.
Ciekawy produkt w dobrej cenie. Polecam
Niezastąpiony wkład. Warty zakupu.
FCPS5 waterRO GRAPHITE is a foam insert (polypropylene nonwoven) for mechanical water filtration. It effectively removes fine solid contaminants, including silt and sludge, present in well water and tap water. Thanks to its precision of 5 microns, it serves as a pre-filter, protecting more expensive inserts as well as the installation and fittings.