Plugs and caps are practical components used to seal and protect the ends of pipes and water connections. They work well wherever it is necessary to temporarily or permanently close the end of an installation and reduce the risk of contaminants getting inside.
Products in this category can be used in both indoor and outdoor installations. In addition to their protective function, they also help maintain the aesthetic appearance of the installation and protect plumbing components from mechanical damage.
Choose plugs and caps for water installations if you value quick installation, convenient protection of pipe ends, and a practical finish for connections.
Check the key values before choosing a solution.
Compare indicative measurement ranges by nominal size, standard family and thread side.
| Thread | NPT female | NPT male | BSP female | BSP male |
|---|---|---|---|---|
| 1/8 | 8.50–8.90 | 9.40–9.70 | 8.50–8.90 | 9.40–9.70 |
| 1/4 | 11.40–11.90 | 12.90–13.10 | 11.40–11.90 | 12.90–13.10 |
| 3/8 | 14.90–15.40 | 16.30–16.60 | 14.90–15.40 | 16.30–16.60 |
| 1/2 | 18.30–18.70 | 20.70–21.10 | 18.60–19.00 | 20.50–20.90 |
| 3/4 | 23.70–24.10 | 26.30–26.70 | 24.10–24.50 | 26.10–26.40 |
| 1 | 30.30–30.80 | 32.90–33.40 | 30.30–30.80 | 33.00–33.20 |
| 5/4 (1 1/4) | 39.20–39.60 | 41.40–42.00 | 39.00–39.50 | 41.50–41.90 |
| 6/4 (1 1/2) | 45.10–45.50 | 47.30–47.90 | 44.80–45.30 | 47.40–47.80 |
Converts the international length inch and accepts decimals, fractions and mixed numbers.
There is 1 product.
Brand: WODARO
Plugs and caps for water installations are small but very important equipment components that make it easier to safely terminate pipes, protect connections, and organize installation and service work. In practice, they are used both during the construction of a new installation and during modernization, repairs, or the temporary shutdown of selected sections of the system.
This category includes plugs and caps designed for sealing and protecting the ends of pipes and water connections. These are practical solutions used in indoor and outdoor installations, helpful in protecting against contaminants, reducing the risk of mechanical damage, and improving the appearance of installation terminations. These products are also useful wherever quick and convenient installation matters.
Plugs and caps are used wherever it is necessary to effectively close the end of a pipe, connection, or plumbing component. They can serve as a temporary solution, for example during installation work, or as a permanent safeguard for an unused water outlet.
Products in this category can be used both in installations routed inside buildings and outside them. These are universal accessories useful in many plumbing tasks related to utility water systems and connection fittings.
Properly selected plugs and caps help increase the functionality of the installation and reduce problems resulting from leaving pipe ends open. These are simple accessories that often play an important role in the everyday use of a water system.
When choosing, it is worth being guided primarily by the place of use and the type of component being protected. In practice, the most important thing is matching the product to the pipe end, connection, or plumbing component that you want to close or protect.
If the plug or cap is to work with a specific installation component, it is worth checking the connection method and compatibility with the given connection before purchase. Proper matching is crucial for effectively protecting the end of the installation.
These types of accessories are especially useful in situations where the installation is not yet complete, some connections remain unused, or it is necessary to temporarily disconnect part of the system. They are also useful when you want to improve the appearance of visible terminations or better protect plumbing components from dirt.
They are used for sealing and protecting the ends of pipes, water connections, and selected plumbing components. They protect the installation from contaminants, help protect terminations from mechanical damage, and improve the overall appearance of the installation.
Yes. According to the intended use of this category, they can be used in both indoor and outdoor installations. However, when choosing, it is always worth matching the product to the specific installation location and type of connection.
In practice, both solutions are used to close or protect installation ends. The terminology may vary depending on the design of the component and the method of use, but the basic function remains similar: protection and closure of the end of a pipe or connection.
Most often during installation, renovation, or service work, when it is necessary to close part of the installation for a certain time or protect an open end from dirt until further installation continues.
Yes. In addition to their technical function, they help tidy up the appearance of pipe ends and plumbing components. This is especially important where installation terminations are visible and should look neat.
Yes. One of their basic functions is to protect the ends of pipes and connections from contaminants that could get inside the installation during installation, downtime, or use.
Above all, the type of component being protected, the place of use, the intended purpose of the product, and ease of installation. Proper matching to the pipe end, connection, or plumbing component is key.
Yes. These are practical solutions that work well wherever quick installation and efficient protection of water installation ends are important, without unnecessarily complicating the work.
Yes, this is one of their typical uses. Caps and plugs are often used to protect unused installation terminations, both temporarily and as a permanent solution.
