FHPR34-B1-AQ Aquafilter pipe body 3/4"

Durable inline housing for cold water

Aquafilter FHPR34-B1-AQ is a two-piece 10" inline housing designed for use with cold water. The construction consists of two basic elements: a transparent sump and a head with a 3/4" brass thread. This solution makes everyday use, installation, and replacement of the filter cartridge easier.

The housing is equipped with two sealing O-rings: one face seal and one under the head. The double sealing increases the tightness of the entire system and helps maintain safe operation of the installation at a working pressure of up to 6 bar.

Transparent sump and convenient cartridge inspection

The transparent sump allows you to quickly assess the level of cartridge contamination without having to disassemble the housing. This is a practical feature in everyday use, especially when the housing works as a pre-filter for water in a domestic installation or as protection for subsequent treatment stages.

The housing is also equipped with a pressure relief valve, which allows the removal of air collected inside the filter after cartridge replacement. This makes restarting the system after service more convenient and more predictable.

Where is the Aquafilter FHPR34-B1-AQ housing suitable?

The FHPR34-B1-AQ model can be installed individually or connected in series with other filter housings. This provides great flexibility when designing simple and more advanced filtration systems.

• on the pipe supplying cold water to an apartment, with moderate water demand,
• in front of household appliances such as a washing machine and dishwasher,
• as a preliminary component that helps protect further filtration stages,
• in systems where a replaceable 10" filter cartridge is required.

Installation in front of expensive household appliances helps protect them against the buildup of various contaminants present in water. It is a simple way to support appliance durability and reduce the risk of problems caused by the presence of solid particles.

Compatibility with 10-inch cartridges

The housing works with a wide range of 10" cartridges available on the market. This makes it possible to match the filtration method to the specific needs of the system and the water quality.

• mechanical cartridges,
• specialist cartridges,
• carbon cartridges,
• softening cartridges,
• iron removal cartridges,
• antibacterial cartridges.

This versatility means the housing can operate both as a basic inline filter and as part of a more advanced solution, for example before a reverse osmosis system installation, an RO filter, or another set for improving water quality.

Installation and operation

Proper installation is very important for the safe and convenient operation of the housing. The housing should be suspended on a mounting bracket, which supports the stability of the entire set and makes later service handling easier.

Key advantages

• two-piece 10" construction,
• transparent sump for monitoring cartridge condition,
• head with 3/4" brass thread,
• two sealing O-rings increasing tightness,
• pressure relief valve facilitating startup after cartridge replacement,
• can be installed individually or in series,
• wide compatibility with 10" cartridges.

Package contents

• FHPR34-B1-AQ inline housing
• Two sealing O-rings
• FCPS5 polypropylene foam filter cartridge
• Bacteriostatic centering disc
• Wrench
• Mounting bracket

Technical specification