- There are no more items in your cart
- Shipping
- Total 0.00 zł
- Bestsellers
- Wholesale
- Water filters
- Whole house filters
- Kitchen filters
- Bathroom filters
- Aquarium filters
- Reverse osmosis
- Water demineralizers
- Filter cartridges
- UV bactericidal lamps
- Alkaline water ionizers
- Industrial water filters
- Accessories, parts, and others
- Descaling filters for the coffee machine
- Water softeners and iron removers
- Water saturators
- ACES
- AMBERLITE
- AQUA VITA
- AQUAFILTER
- AQUAPHOR
- AQUATOR
- BASSAU
- BERG
- BIOCERA
- BIONIQ
- BLUEFILTERS
- CHEMOFORM
- CINTROPUR
- DAFI
- DELONGHI
- DIAMOND
- DOM WODY
- ECOWATER
- FILMTEC
- FIT ALCO
- FITAQUA
- GREEN FILTER
- HANNA INSTRUMENTS
- HELIXPRO
- HELLO PURE
- HIDROTEK
- HM-DIGITAL
- HONEYWELL
- Ibo
- JAVEL
- KLARWOD
- KRUPS
- MIDEA
- OTOWODA
- OTTONE
- Palintest
- PENTAIR
- PHILIPS
- PLATINUM WASSER
- PUROLITE
- SIEMENS
- Steingraf
- SUPREME
- TAB-SOL
- TOP FILTER
- UST-M
- USTM
- VONTRON
- WODARO
-
PayU
Tips
Filter
Price
Wysokość wkładu
Brand
Out of Stock
AC-PP-10-20 FITaqua 20 micron filter cartridge
FITaqua AC-PP-10-20 is a mechanical foam insert made of polypropylene...
FITaqua AC-PP-10-20 is a mechanical foam insert made of polypropylene non-woven fabric (meltblown) for 10-inch filters. It captures undissolved impurities, including rust, sand, silt, and suspensions, up to 20 microns . It fits 10 x 2.5-inch housings, also in under-sink and RO systems. PZH certification, BPA FREE, PHTHALATE FREE.
Price
6.00 zł
FITaqua AC-PP-10-1 is a mechanical foam insert made of polypropylene...
FITaqua AC-PP-10-1 is a mechanical foam insert made of polypropylene non-woven fabric (meltblown) for 10" water filters. It effectively captures undissolved impurities down to 1 micron (including rust, sand, silt, and suspensions). It fits most 10" housings (10 x 2.5") and can operate in pipe installations, under sinks, and in RO systems. PZH certification, BPA FREE, PHTHALATE FREE.
Price
6.00 zł
FCPS20 waterRO to a foam sediment filter with a filtration accuracy of 20...
FCPS20 waterRO to a foam sediment filter with a filtration accuracy of 20 microns . It effectively removes fine mechanical impurities from water, such as silt and sludge, present in both well water and tap water. Used in under-sink and inline filters as protection for installations and specialized cartridges. Format 10" x 2.5" .
Price
6.00 zł
FCPS5 waterRO GRAPHITE is a foam insert (polypropylene nonwoven) for...
FCPS5 waterRO GRAPHITE is a foam insert (polypropylene nonwoven) for mechanical water filtration. It effectively removes fine solid contaminants, including silt and sludge, present in well water and tap water. Thanks to its precision of 5 microns , it serves as a pre-filter, protecting more expensive inserts as well as the installation and fittings.
Price
6.00 zł
FCPS1 wodaRO (1 micron) is a foam sediment filter for removing fine...
FCPS1 wodaRO (1 micron) is a foam sediment filter for removing fine mechanical impurities from water, such as silt or sludge. It is used in 10" filters (2.5" diameter) as the first stage of protection for the system and more expensive cartridges (carbon, softening, de-ironing). It filters through the entire structure of polypropylene nonwoven fabric.
Price
6.00 zł
FCPS1 Aqua Vita is a sedimentation foam cartridge made of polypropylene...
FCPS1 Aqua Vita is a sedimentation foam cartridge made of polypropylene non-woven fabric for cold water filtration. It removes fine solid impurities such as sand, sludge, silt, and rust. Used in cartridge filters, under-sink filters, and osmotic systems, it helps protect subsequent filtration stages and the water installation.
Price
6.00 zł
Brass nipple 1/2" with a length of 37 mm for making durable connections in...
Brass nipple 1/2" with a length of 37 mm for making durable connections in hydraulic installations. Made of brass, resistant to corrosion and suitable for use in cold and hot water systems as well as central heating (ZWU, CWU, CO). Facilitates quick connection of standard size 1/2" components.
Price
5.99 zł
FCPS50 Aquafilter is a sedimentation foam cartridge made of polypropylene...
FCPS50 Aquafilter is a sedimentation foam cartridge made of polypropylene non-woven fabric for cold water filtration. It effectively traps fine solid impurities such as sand, sludge, silt, and rust. Used in cartridge filters, reverse osmosis systems, and under-sink filters, it helps protect the installation and subsequent filtration stages, including carbon cartridges and the reverse osmosis membrane. It has an NSF certification.
Price
5.98 zł
Single mounting bracket for a 3" membrane housing in white. Made of flexible...
Single mounting bracket for a 3" membrane housing in white. Made of flexible plastic, it allows for slight bending and quick insertion of the filter or housing. The profiled reinforcements increase the elasticity and rigidity of the bracket, facilitating stable mounting.
Price
5.00 zł
Mechanical foam insert UST-M PS5 made of polypropylene nonwoven for water...
Mechanical foam insert UST-M PS5 made of polypropylene nonwoven for water filtration. Effectively traps larger undissolved mechanical impurities such as rust, sand, silt, and suspensions, up to a size of 5 microns . Designed as a pre-filter to improve water clarity.
Price
5.00 zł
UST-M PS1 Foam Insert for mechanical water filtration. Made of...
UST-M PS1 Foam Insert for mechanical water filtration. Made of polypropylene nonwoven fabric, it helps remove larger undissolved contaminants such as rust, sand, silt, and suspensions. A solution for pre-cleaning in filtration systems.
Price
5.00 zł
WPM20 USA is a sedimentation foam insert made of polypropylene nonwoven...
WPM20 USA is a sedimentation foam insert made of polypropylene nonwoven fabric for cold water filtration. It effectively captures fine solid contaminants such as sand, sludge, silt, and rust. Used in cartridge, osmotic, and under-sink filters, it helps protect subsequent filtration stages and the water installation.
Price
5.00 zł
WPM5 USA is a sedimentation foam insert made of polypropylene nonwoven...
WPM5 USA is a sedimentation foam insert made of polypropylene nonwoven fabric for cold water filtration. It effectively removes fine solid contaminants such as sand, sludge, silt, and rust. Used in cartridge filters, osmotic systems, and under-sink filters, it protects the installation and subsequent filtration stages (e.g., carbon inserts and the osmotic membrane).
Price
5.00 zł
Sediment filter (foam) made of polypropylene non-woven fabric for water...
Sediment filter (foam) made of polypropylene non-woven fabric for water filtration. Effectively removes fine solid impurities such as sand, silt, sludge, or rust. Used in cartridge filters, osmotic filters, and under-sink filters, it protects subsequent filtration stages and the installation. Designed for cold water.
Price
5.00 zł
S-PP20 Supreme is a polypropylene filter cartridge for treating cold...
S-PP20 Supreme is a polypropylene filter cartridge for treating cold drinking and utility water. It effectively captures mechanical impurities larger than 20 microns, such as sand, silt, and rust. The cartridge is made of pure polypropylene using melt-blown technology, which ensures good filtration with low pressure drop. The material is resistant to chemicals and limits bacterial growth. The product has a PZH certificate.
Price
4.46 zł
Universal Aquafilter key for disconnecting hoses from quick connectors in RO...
Universal Aquafilter key for disconnecting hoses from quick connectors in RO water filters. Fits 1/4", 3/8", and 1/2" tubing. It facilitates safe disconnection of push-fit connections without tugging on the hose and without the risk of damaging the connector.
Price
4.00 zł
Gray double handle for connecting the membrane housing to the inline filter....
Gray double handle for connecting the membrane housing to the inline filter. Made of flexible plastic, it allows for slight bending and quick insertion of components. Shaped reinforcements increase elasticity and rigidity. Dimensions: 2.5" x 2".
Price
4.00 zł
Gray double handle for connecting two membrane housings or filters with a...
Gray double handle for connecting two membrane housings or filters with a diameter of 2.5". Made of flexible plastic, it allows for slight bending and quick insertion of the housing. Shaped reinforcements ensure elasticity and stable holding.
Price
4.00 zł
Gray single handle for a membrane or filter housing with a diameter of 2.5"....
Gray single handle for a membrane or filter housing with a diameter of 2.5". Made of flexible plastic, it allows for slight bending and quick insertion of the housing. The profiled reinforcements ensure elasticity and stable grip.
Price
4.00 zł
Gray double connector for joining two linear filters or housings with a...
Gray double connector for joining two linear filters or housings with a diameter of 2". Made of flexible plastic that allows for slight bending and quick insertion of components. Profiled reinforcements ensure elasticity and stable holding once installed.
Price
4.00 zł
Gray single handle for 2" linear filters. Made of plastic with controlled...
Gray single handle for 2" linear filters. Made of plastic with controlled flexibility, which facilitates slight bending and quick insertion of the filter or housing. Shaped reinforcements increase the elasticity and rigidity of the handle, helping to securely hold the element.
Price
4.00 zł
A4TR4-W quick connector tee 1/4T x 1/4W x 1/4T for installing 1/4" (6.4...
A4TR4-W quick connector tee 1/4T x 1/4W x 1/4T for installing 1/4" (6.4 mm) hoses in water treatment systems, including under sinks and in reverse osmosis. Two quick connector ports allow for quick hose attachment without twisting and without Teflon tape, while the third is a 1/4" plug. Ideal for splitting treated water to two extraction points.
Price
4.00 zł
A4SRT4-W T-piece connector for installation on a 1/4" (6.4 mm) hose: two...
A4SRT4-W T-piece connector for installation on a 1/4" (6.4 mm) hose: two quick-connect type connections for the hose and one 1/4" female connection. Used, among others, in under-sink water treatment systems, including reverse osmosis. The hose installation involves pushing it in fully, without twisting and without Teflon tape.
Price
4.00 zł
A4MBT4-W tee 1/4T x 1/4G x 1/4T for water treatment installations. It has...
A4MBT4-W tee 1/4T x 1/4G x 1/4T for water treatment installations. It has two quick connectors for a 1/4" (6.4 mm) hose and an external thread of 1/4". It allows for the splitting of the water line, e.g., in under-sink systems and reverse osmosis. The hose is installed by pushing it in fully, without twisting; Teflon tape is only required on the threaded part.
Price
4.00 zł