- There are no more items in your cart
- Shipping
- Total 0.00 zł
- Bestsellers
- Wholesale
- Water filters
- Whole house filters
- Kitchen filters
- Bathroom filters
- Aquarium filters
- Reverse osmosis
- Water demineralizers
- Filter cartridges
- UV bactericidal lamps
- Alkaline water ionizers
- Industrial water filters
- Accessories, parts, and others
- Descaling filters for the coffee machine
- Water softeners and iron removers
- Water saturators
- ACES
- AMBERLITE
- AQUA VITA
- AQUAFILTER
- AQUAPHOR
- AQUATOR
- BASSAU
- BERG
- BIOCERA
- BIONIQ
- BLUEFILTERS
- CHEMOFORM
- CINTROPUR
- DAFI
- DELONGHI
- DIAMOND
- DOM WODY
- ECOWATER
- FILMTEC
- FIT ALCO
- FITAQUA
- GREEN FILTER
- HANNA INSTRUMENTS
- HELIXPRO
- HELLO PURE
- HIDROTEK
- HM-DIGITAL
- HONEYWELL
- Ibo
- JAVEL
- KLARWOD
- KRUPS
- MIDEA
- OTOWODA
- OTTONE
- Palintest
- PENTAIR
- PHILIPS
- PLATINUM WASSER
- PUROLITE
- SIEMENS
- Steingraf
- SUPREME
- TAB-SOL
- TOP FILTER
- UST-M
- USTM
- VONTRON
- WODARO
-
PayU
Tips
-
The water in the osmosis system is constantly flowing to the sewage - what to do?
-
Organic compounds in water – harmfulness, removal, and where do they come from?
-
Ammonia in water – where does it come from, is it harmful, and how to remove it?
-
Water filtration - why? Hit or miss?
-
Drinking water - effects after a month, skin and weight loss
Wireless Flood Detection Sensor
Rating
Wireless flood sensor for the anti-flooding system with a controlled water shut-off valve. Installed in the location where water appears most quickly in the event of a leak. Upon contact of the probes with water, the sensor sends a radio signal, which can trigger the closure of the ball valve and cut off the water supply behind the valve. The waterproof design reduces the risk of corrosion of the electronics.
Description
Wireless Flood Protection Sensor WIRELESS Flood Detector is a practical component of an anti-flood system, designed to work with a controlled water shut-off valve. It is installed where water appears fastest during a leak, so that the threat can be detected as early as possible and the system can respond. When the probes come into contact with water, the wireless flood sensor sends a radio signal that can cause the ball valve to close and shut off the water supply downstream of the valve. This solution increases the safety of water installations in homes, service premises, and industrial facilities, while also complementing a modern water filtration system, water filter, or water treatment installation wherever control over water circulation is important.
Wireless flood sensor for fast response to leaks
Water leaks are among the most common causes of damage in domestic and utility installations. The problem can appear suddenly, and its source may be both worn installation components and incorrectly made plumbing connections. The risk also increases when water pressure is too high.
This wireless flood detector has been designed to detect the presence of water at the failure point as quickly as possible and transmit a signal to the system that cuts off the water supply. This helps limit the effects of the leak and reduce the risk of costly property damage.
How the flood protection sensor works
The operating principle of the sensor is simple and effective. The device should be installed in a place where water collects fastest during a leak. When the sensor probes come into contact with water, current begins to flow between the probes.
As a result, the sensor sends a wireless signal that can trigger the closing of the ball valve. This leads to the water supply being cut off downstream of the valve, allowing a quick response to the installation failure.
Key benefits
- wireless signal transmission after water contact is detected,
- compatibility with a controlled water shut-off valve,
- installation in the area most exposed to the first signs of a leak,
- automatic system response that can limit the scale of flooding,
- waterproof construction that reduces the risk of corrosion of the internal electronics,
- application in domestic, commercial, and industrial systems.
Where to install the sensor
The flood sensor is best installed where water appears first in the event of a leak. Such placement increases protection effectiveness and shortens the response time of the entire anti-flood system.
The device works well wherever a water supply or sewage installation is in operation, as well as near equipment and systems that use water. It is a good addition to infrastructure where a shut-off valve, reverse osmosis filter, reverse osmosis, reverse osmosis system, or another system responsible for water circulation and control operates.
Application
The product is dedicated to leak protection in:
- domestic water supply and sewage systems,
- commercial water supply and sewage systems,
- industrial water supply and sewage systems.
In each of these installations, a leak can lead to operational problems, downtime, and material losses. Using the sensor helps increase the level of control over the installation and better protect rooms from the consequences of a failure.
The sensor should be installed in the place where water collects fastest during a leak. For the system to respond automatically, the device should work with a controlled water shut-off valve. In the case of a more extensive installation, the control valve can receive a signal from up to 5 sensors at the same time.
Why use flood protection
Water installation components are prone to leaks, especially when water pressure is too high or plumbing connections have been made incorrectly. Even an apparently minor leak can lead to flooding of the floor, damage to walls, furniture, technical equipment, or storage areas.
A water leak is not only an inconvenient operational issue, but also a real threat to property. The wireless flood sensor helps reduce this risk by supporting a quick shut-off of the water supply after liquid is detected.
Durable construction for demanding environments
The wireless flood sensor has a waterproof design that helps prevent corrosion of the internal circuit. This is an important feature in a device operating in an environment where contact with moisture and water is potentially possible.
As a result, the sensor is better suited for use in places related to the operation of water installations and protection systems.
Technical specifications
| Product type | wireless flood sensor / flood protection sensor |
|---|---|
| Intended use | anti-flood system with a controlled water shut-off valve |
| Operating principle | after the probes come into contact with water, the sensor sends a wireless signal |
| System response | possible closing of the ball valve and cutting off the water supply downstream of the valve |
| Mounting location | in a place where water accumulates fastest during a leak |
| Number of compatible sensors | the control valve can receive a signal from 5 sensors at the same time |
| Construction | waterproof |
| Electronics protection | the design reduces the risk of corrosion of the internal circuit |
| Application | domestic, commercial, and industrial water supply and sewage systems |
| Quantity in set | 1 pc. |
FAQ
What is a wireless flood sensor used for?
The sensor is used to detect the presence of water at a potential leak site. After the probes come into contact with water, it sends a wireless signal to the anti-flood system, which can trigger the valve to close and cut off the water supply.
Where is the best place to install a flood protection sensor?
The best mounting location is the point where water collects fastest during a leak. This allows the sensor to detect the threat earlier and activate the system response more quickly.
How does the sensor work after contact with water?
When the sensor probes touch water, current begins to flow between them. This triggers the sending of a wireless signal that can cause the ball valve to close and cut off the water supply downstream of the valve.
Can one control valve work with several sensors?
Yes. The control valve can receive a signal from 5 sensors at the same time, which makes it easier to protect several critical points in one installation.
Is the sensor suitable only for homes?
No. The product is intended to protect against water leaks in domestic, commercial, and industrial systems, both water supply and sewage systems.
Why is it worth using a flood sensor in a water installation?
Water supply installations are exposed to leaks, especially with too high water pressure or incorrectly made plumbing connections. The sensor helps detect failures faster and limit property damage.
Does the waterproof construction matter in everyday use?
Yes. The waterproof construction helps protect the internal circuit against corrosion, which is especially important in an environment where the device may come into contact with moisture or water.
Can this type of sensor be used with filtration and water treatment installations?
Yes, the sensor can provide additional protection wherever a water filter, water filtration system, osmosis filter, or reverse osmosis system is used. Its task is to detect leaks and support a quick shut-off of the water supply.
Product Details
ok
działa dobrze
Super
Super
Śpię spokojnie
Kupiłam dla siebie do domu i dla mamy, czujemy się pewniej. Solidna firma i szybka dostawa.
Dziękujemy!
Wireless flood sensor for the anti-flooding system with a controlled water shut-off valve. Installed in the location where water appears most quickly in the event of a leak. Upon contact of the probes with water, the sensor sends a radio signal, which can trigger the closure of the ball valve and cut off the water supply behind the valve. The waterproof design reduces the risk of corrosion of the electronics.