The OTOWODA PS1 water filter is a foam cartridge with a filtration precision of 1 micron, designed for effective removal of contaminants such as sand, silt, or rust
PS1 OTOWODA is a foam filter insert for water with a filtration precision of 1 micron, designed for effective removal of mechanical contaminants such as sand, silt, and rust. It works well as a water filter protecting household plumbing, fittings, and appliances, as well as a pre-filtration stage wherever a water filtration system, reverse osmosis filter, or complete reverse osmosis system is used. It is a practical solution for everyday water treatment and for protecting subsequent filtration stages from excessive load.
OTOWODA PS1 in the 10-inch size has been designed for precise mechanical filtration. Its task is to retain fine particles present in water before they can reach the plumbing, faucets, valves, household appliances, or more advanced filtration systems.
With a filtration accuracy of 1 µm, the insert effectively reduces the presence of contaminants such as:
That is why the PS1 insert is widely used both in household water treatment systems and as a pre-filter in solutions such as a reverse osmosis system or a kitchen osmosis filter.
The insert removes contaminants up to 1 micron in size, which translates into very effective protection of household water systems. Such precise filtration helps protect fittings, valves, and appliances from the buildup of solid particles present in water.
The reinforced, three-layer structure allows the insert to retain a larger amount of contaminants. This design positively affects filtration efficiency and supports longer service life under typical operating conditions.
PS1 works very well as a first stage wherever protection of subsequent system components is important. It is a good choice for household installations, kitchen water filters, and systems where a reverse osmosis system operates.
The material structure used supports effective trapping of mechanical contaminants and allows the insert to be used as a reliable first-stage water purification element.
The OTOWODA PS1 filter insert helps prevent contaminants from settling in plumbing systems and household appliances. In practice, this means a lower risk of failures and better protection of components in constant contact with water.
Thanks to its three-layer construction, the insert retains a larger amount of contaminants, which supports longer service life and may reduce replacement frequency. At the same time, it protects later filtration stages from excessive sediment load.
Precise mechanical filtration makes it possible to remove even very small contaminant particles. The result is cleaner water in the circulation system and safer operation of water treatment systems.
PS1 OTOWODA is a solution intended for home use wherever effective mechanical water filtration is needed. The insert is especially suitable for:
Important: the service life of the insert, its capacity, and actual operating time depend on the level of water contamination. In the case of water with a higher sediment content, replacement may be needed sooner.
This is a reliable foam insert for home filtration, combining high purification precision with practical protection for plumbing and appliances. By effectively removing sand, silt, and rust, PS1 helps extend equipment life, improve the operating conditions of the water filtration system, and limit the transfer of contaminants to subsequent treatment stages.
If you are looking for a compact 10-inch insert for mechanical filtration that will work as a first stage of installation protection or support for an osmosis system, the PS1 model is a solid choice.
* Service life and capacity depend on the level of water contamination.
The OTOWODA PS1 water filter is a foam insert with 1-micron filtration precision, designed for effective removal of contaminants such as sand, silt, and rust. Ideal for protecting household water installations and filtration systems such as reverse osmosis.
Key FeaturesHigh filtration precision – 1 micron
The filter effectively removes contaminants up to 1 µm in size, such as sand, silt, and rust, providing excellent protection for water installations, household appliances, and fittings.
Three-layer construction
The reinforced three-layer structure of the filter allows it to retain a larger amount of contaminants, significantly extending its service life and improving filtration efficiency.
Ideal for reverse osmosis systems
The insert works excellently as pre-filtration in reverse osmosis systems and kitchen water filters thanks to its nonwoven polypropylene structure with open-cell microbubbles.
Protection of household installations
The OTOWODA PS1 filter prevents contaminants from settling in water installations and household appliances, extending their service life and minimizing the risk of failures.
Longer filter life
Thanks to its three-layer construction, the filter retains a larger amount of contaminants, which translates into extended service life and less frequent replacement.
Effective contaminant removal
Precise filtration makes it possible to remove even the smallest contaminant particles, ensuring clean water and safe use for household installations and filtration systems.
The OTOWODA PS1 Water Filter is a reliable solution for home filtration, providing precise water purification, installation protection, and extended equipment life. Ideal for those who value clean water and long-term appliance protection.
Technical parameters(* Service life and capacity depend on the level of water contamination).
| Parameter | Value |
|---|---|
| Model | OTOWODA PS1 |
| Type | Foam water filter insert |
| Filtration precision | 1 µm |
| Filter height | 10" (25 cm) |
| Diameter | 2.5" (6 cm) |
| Service life | up to 14,000 L* |
| Capacity | up to 25 L/min* |
| Durability | max. 6 months* |
| Retained contaminants | Sand, silt, rust |
| Construction | Three-layer |
| Material / structure | Nonwoven polypropylene with open-cell microbubbles |
| Application | Pre-filtration, protection of water installations, kitchen water filters, reverse osmosis systems |
It is a foam insert for mechanical water filtration. Its task is to retain contaminants such as sand, silt, and rust in order to protect the water installation, fittings, household appliances, and subsequent filtration system components.
The PS1 model offers a filtration precision of 1 µm, or 1 micron. This allows it to effectively remove very fine mechanical contaminants present in water.
Yes. The insert works well as pre-filtration in reverse osmosis systems. It helps protect subsequent stages of the system and reduces the amount of sediment reaching more sensitive system components.
The insert is designed to remove mechanical contaminants, in particular sand, silt, and rust. These are typical sediments that can negatively affect the condition of installations and household appliances.
The insert height is 10" (25 cm), and the diameter is 2.5" (6 cm). It is a popular format used in many home water filtration systems.
Capacity is up to 25 L/min, and service life is up to 14,000 liters. Maximum operating durability is 6 months. In practice, these values depend on the level of water contamination.
The three-layer design allows a larger amount of contaminants to be retained, improving filtration efficiency and supporting longer insert operation. This is especially important where water contains a larger amount of mechanical sediment.
Yes. By reducing the amount of solid particles in water, the insert helps protect household appliances, fittings, and water installations from sediment buildup and reduces the risk of operating problems.
The insert should be replaced after reaching the maximum operating time, after its service life has been used up, or earlier if the flow rate drops. Replacement frequency depends on the quality and level of contamination of the filtered water.
Compatible devices and housings.
Brand: OTOWODA
Brand: OTOWODA
Brand: OTOWODA
