WodaRO MONO 22 is a compact water softener designed to remove water hardness in homes and small facilities (e.g., restaurants, car washes, boiler rooms). It operates on monospheric resin LEWATIT S1567, exchanging calcium and magnesium ions for sodium. The device features by-pass, adjustable hardness of the outgoing water, and a BNT controller with a Polish menu and a backlit display. During regeneration, it does not cut offwater supply.
WodaRO MONO 22 is a compact water softener for homes and small commercial facilities, designed for effective removal of water hardness. The unit operates with LEWATITT S1567 monospherical resin, protects the installation and appliances from limescale, supports everyday water treatment, and improves the comfort of using utility water. Thanks to the by-pass, outlet water hardness adjustment, and operation without cutting off the water supply during regeneration, it is a practical water filter and part of a home water filtration system wherever convenience, economy, and stable operation matter.

The WodaRO MONO 22 water softener has been designed for use in single-family homes, restaurants, car washes, boiler rooms, and other places where hard water causes real operational problems. It is a solution for users who want to reduce limescale buildup, improve installation operating conditions, and increase the comfort of everyday utility water use.
Hard water, present in many water sources in Poland, contains calcium and magnesium compounds. These are responsible for deposits on fittings, heating devices, and household appliances, higher consumption of washing, laundry, and cleaning agents, as well as heat energy losses. Using a water softener helps reduce these effects and supports more economical operation of a home or service facility.
Water softeners for utility water used in homes or hotels bring measurable economic benefits: they can reduce the consumption of laundry detergents or cleaning products by up to 50%. Soft water also improves everyday comfort — it does not dry out the skin, helps reduce dandruff problems, and promotes more skin-friendly contact with water.
The softening process consists of removing the components responsible for water hardness from the water. In practice, the device exchanges calcium and magnesium ions for sodium ions as the water flows through the ion exchange resin. As a result, utility water becomes soft, and the installation is better protected against deposit buildup.
When the ion exchange capacity of the media is exhausted, the unit performs regeneration using a brine solution. This is a standard and proven method of restoring the full efficiency of the media, allowing high softening performance to be maintained over a long period.
The softener does not cut off the water during regeneration, which increases convenience in everyday use. An additional advantage is the by-pass and outlet water hardness adjustment, making it easier to match the unit's operation to the needs of the installation.
The compact design makes installation easier in technical spaces, while the clear BNT controller with a Polish menu and backlit display simplifies everyday operation. This is a particularly convenient solution for people looking for an effective water treatment system without complicated configuration.
The heart of the unit is LEWATITT S1567 monospherical resin. The use of this type of media has a direct impact on ion exchange efficiency, operating stability, and the softener's performance parameters.
An additional advantage is the high ability to remove magnesium and calcium ions, which translates into effective reduction of water hardness in the installation.
WodaRO MONO 22 has been prepared for convenient operation in domestic and commercial conditions. Volumetric-time control allows the regeneration process to be managed based on consumption and the unit's operating settings, while the compact housing makes it easier to organize the installation space.
The device works well as a central element of a building water treatment system. In practice, it can cooperate with other solutions used in water installations, such as a water filter at the installation inlet, and in more advanced systems also with end-point devices such as reverse osmosis, an osmotic filter, a reverse osmosis filter, or a reverse osmosis system designed for preparing drinking water at the point of use.
To maintain proper operation of the unit, salt intended for media regeneration should be replenished, and the softener should be operated within the working parameter range given in the technical specification, in particular operating pressure and temperature.
The softener has a compact housing and dimensions of 101 cm in height, 33 cm in width, and 54 cm in depth. These proportions make it easier to plan the installation space in a technical room, boiler room, or utility area. The 1" connection allows convenient integration of the unit into the water installation.
WodaRO MONO 22 combines effective hardness removal with everyday ease of use. The use of LEWATITT S1567 resin, the BNT1650 valve, operation without cutting off water during regeneration, and the possibility of adjusting outlet water hardness make it a practical solution for both homes and small commercial facilities.
It is a device that helps reduce limescale buildup, improve the operating conditions of installations and equipment, reduce detergent consumption, and increase the comfort of daily water use.
| Model | wodaRO MONO 22 |
|---|---|
| Control valve | BNT1650 |
| Media volume | 32 l |
| Media type | Monospherical media with high capacity for removing magnesium and calcium ions |
| Housing type | compact |
| Salt tank capacity | 50 l |
| Power supply | 220-240 V / 50-60 Hz |
| Operating voltage | 12 V 1000mA |
| Power consumption | 5W |
| Operating temperature | 2-49°C |
| Operating pressure | 1,8-6 bar |
| Average salt consumption per regeneration | 3,5 kg |
| Regeneration control | volumetric-time |
| Average capacity | 3 m3/h |
| Height | 101 cm |
| Width | 33 cm |
| Depth | 54 cm |
The device is used to remove water hardness in single-family homes, restaurants, car washes, boiler rooms, and other small facilities where the high content of calcium and magnesium compounds is a problem.
The softener exchanges the calcium and magnesium ions responsible for water hardness for sodium ions. The process takes place as water flows through the ion exchange resin, and after the exchange capacity is exhausted, the media is regenerated with a brine solution.
No. One of the important features of the WodaRO MONO 22 model is that it does not cut off water during regeneration, which increases the comfort of using the installation.
The unit uses LEWATITT S1567 monospherical resin. It provides high flow rates during media exhaustion and regeneration, optimal use of exchange capacity, low water consumption for rinsing, and a uniform operating zone of the media.
Yes. The WodaRO MONO 22 model features outlet water hardness adjustment, which makes it possible to adapt the operating parameters to the user's and installation's needs.
The softener has a 1" connection, 32 l of media, a 50 l salt tank capacity, an average capacity of 3 m3/h, volumetric-time regeneration control, and operates within a pressure range of 1,8-6 bar and a temperature range of 2-49°C.
WodaRO MONO 22 is 101 cm high, 33 cm wide, and 54 cm deep. The compact housing makes installation easier in technical rooms.
Yes. Removing calcium and magnesium ions limits limescale formation, which can improve the operating conditions of installations, heating devices, and household appliances.
Yes. The softener can be part of a broader water filtration system. In practice, it often works together with other water treatment solutions, and in selected installations also with point-of-use devices such as a reverse osmosis system for preparing drinking water.
trwała konstrukcja dobre wykonanie produktu
Zmiękcza wodę. Stosują go rodziny w domach jak i właściciele restauracji i myjni samochodowych..
Brand: WODARO
Brand: WODARO
Brand: WODARO
WodaRO MONO 22 is a compact water softener designed to remove water hardness in homes and small facilities (e.g., restaurants, car washes, boiler rooms). It operates on monospheric resin LEWATIT S1567, exchanging calcium and magnesium ions for sodium. The device features by-pass, adjustable hardness of the outgoing water, and a BNT controller with a Polish menu and a backlit display. During regeneration, it does not cut offwater supply.