AQUAFILTER 100 AQUARIUM REVERSE OSMOSIS WATER FILTER RO3

AQUARIUM FILTER RO3 AKVA LINE

Complete, 3-stage, ready-to-install reverse osmosis system, with AQUAFILTER 100 GPD membrane

Performance up to 370l/day*

The filter is mainly intended for all types of aquariums

Removes up to 98% of all water contaminants: mechanical, dissolved compounds, and microorganisms.

We include a mounting instruction with each device.

*at a pressure of 6 bar and water temperature of 25°C

The system is designed to improve water quality using reverse osmosis, one of the most advanced water purification methods.

Advantages of the RO3 system:

• Proven, efficient, high-quality, branded osmotic membranes achieving very good filtration results and characterized by a long service life.

• Original pre-filters – pre-clean the water, protecting the osmotic membrane and extending its lifespan

• Specifically selected flow restrictor.

• Polish user/installation manual

• Filters are already prepared (screwed together for installation)

• Elegant, aesthetic packaging.

Basic applications of the RO filter for aquarium purposes:

• Reduction of water conductivity – an important parameter for aquarists, this set is intended for freshwater aquaristics; for marine aquaristics, we recommend expanding the system with the DEMI module (available in our other auctions)

• Reduction of pH – in most cases, the reduction is by 1-2 points*.

• Water softening – the osmotic membrane effectively removes calcium and magnesium compounds from the water, thus reducing the overall hardness of the water to zero or near zero Dh*

*depending on the parameters of the filtered water

Filtration stages:

1. WPL2 - Linear cartridge made of polypropylene foam. They are used to filter sand, silt, rust particles, and other solid contaminants from drinking water, effectively protecting household appliances. (replaced every 6 months maximum)

2. WWL2 - Carbon linear cartridges remove solid contaminants from water such as: chlorine, chlorine compounds, organic pollutants. (replaced every 6 months maximum)

3. AQUAFILTER 100 – osmotic membrane made from FILMTEC materials. It is a set of semi-permeable thin-film membranes. Combined with polypropylene fiber and activated carbon filters, it allows for truly clean and healthy water. The osmotic membrane removes up to 99% of all dissolved compounds in water, as well as bacteria and viruses. (lifespan approx. 5 - 6 years)

Contents of the set:

• Complete, ready-to-install RO3 filter with a restrictor

• AQUAFILTER 100 osmotic membrane

• Mounting brackets for the filter (in the cabinet or on the wall)

• Sewer connection (clamp)

• 5m hose

• Polish installation manual

• Water connection TO CHOOSE! 3/8” or 1/2” or 3/4” or shower connection* (please provide information after purchase). If no connection is chosen, the standard 1/2" will be sent

*if the shower connection is chosen, there will be no brass valve included as the shower faucet serves as the valve and is unnecessary

Connections to choose from:

1. Connection 3/8” (approximately 15 mm)

2. Connection 1/2" (approximately 20 mm)

3. Connection 3/4" (washing machine/dishwasher), (approximately 25 mm)

4. Connection 1/2" (for shower), (approximately 20 mm)

If no connection is chosen, the standard 1/2" will be sent

Technical data:

• Maximum performance: up to 370L/day*

• Weight: approx. 1 KG

• Minimum/maximum operating pressure: 2.5 bar - 6 bar

• Operating temperature: 2-42 °C

• Ratio of pure water to rejected water: 1:2 - 1:8 depending on pressure and water temperature, average 1:4

*at a pressure of 6 bar and water temperature of 25°C