Water filters
Filter cartridges
Reverse osmosis
Softeners & Iron Filters
Accessories & Parts
Soda makers
Bestsellers
Wholesale
Soda makers
BLOG
Kontakt
Services
PayU
Tips
TFC-75F Aquafilter is an osmotic membrane for reverse osmosis systems. It provides very precise water purification by retaining most dissolved organic and inorganic contaminants, including bacteria and viruses. It also reduces salt content, which results in a significant decrease in hardness. It is suitable for drinking water and aquarium applications. Pre-filters are required for long-term operation.
TFC-75F Aquafilter 75 GPD is an efficient osmosis membrane designed for use in installations such as a reverse osmosis system, a reverse osmosis filter, and a household water filter. This component is responsible for the most precise purification stage, supporting effective water treatment for drinking water and aquarium applications. The membrane retains a wide spectrum of contaminants dissolved in water, reduces the amount of salts, and significantly lowers hardness, and when used correctly together with pre-filters, it can operate reliably for a long time.

Aquafilter TFC-75F 75 GPD is a membrane intended for filters using the reverse osmosis process. The membrane is the heart of the RO system and is responsible for the most precise filtration stage in the entire water filtration system.
In practice, this means very high efficiency in removing contaminants dissolved in water. The membrane retains from 96% to 99.99% of organic and inorganic contaminants, as well as bacteria, viruses, chemical compounds, and heavy metals. Filtration accuracy reaches 0.001 µm, which means the purified water can be used both as drinking water and in aquarium applications.
The membrane consists of many layers wound around a perforated core located inside the cartridge. This design provides a large filtration surface area while maintaining compact dimensions of the working element.
Contaminated water is forced under pressure onto the surface of the membrane. Water molecules pass through microscopic pores, while unwanted contaminants are separated from the clean water stream and directed to the drain.
Purified water passes through openings into the central core and then flows out of the membrane under pressure. Thanks to this, the osmosis filter can provide water with a very high degree of purity, far exceeding the capabilities of standard mechanical methods.
The Aquafilter TFC-75F osmosis membrane reduces the content of dissolved salts in water, which directly translates into a hardness reduction of over 90%. This is especially important for users who want to improve the taste and parameters of drinking water or prepare water for more demanding applications such as aquariums.
Combined with properly selected pre-filter cartridges, the membrane creates an effective water treatment system that helps reduce the presence of many problematic substances found in tap water or water from other sources.
For proper membrane operation and to maintain high filtration efficiency, appropriate protection by pre-filters is very important. They capture contaminants that could accelerate membrane wear and reduce its performance.
The use of pre-filters can extend the membrane service life up to several years. However, actual durability depends on operating conditions and the quality of the feed water.
When replacing the membrane, the flow restrictor installed on the tube discharging contaminated water to the sewer must also be replaced.
The membrane service life applies to standard operation and may vary depending on the quality of the inlet water and random factors such as excessive contamination of well water or a failure in the water supply network.
| Parameter | Value |
|---|---|
| Product name | TFC-75F Aquafilter 75 GPD reverse osmosis membrane |
| Product type | Osmosis membrane |
| Application | Reverse osmosis filters and systems |
| Nominal capacity | 75 GPD |
| Filtration accuracy | 0.001 µm |
| Contaminant retention efficiency | From 96% to 99.99% |
| Reduced contaminants | Dissolved organic and inorganic contaminants, bacteria, viruses, chemical compounds, heavy metals |
| Dissolved salt reduction | Yes |
| Water hardness reduction | Over 90% |
| Filtered water application | Drinking water, aquariums |
| Required operational protection | Pre-filters |
| Replacement recommendation | Replace the flow restrictor |
It is a key component of a reverse osmosis system, responsible for very precise water purification. The membrane removes a wide spectrum of dissolved contaminants, reduces the amount of salts, and helps lower water hardness.
The membrane retains from 96% to 99.99% of dissolved organic and inorganic contaminants, as well as bacteria, viruses, chemical compounds, and heavy metals.
Yes, the membrane is intended for reverse osmosis systems used to obtain perfectly purified water suitable for drinking.
Yes, the purified water obtained with this membrane is also suitable for aquarium applications, where low salt and contaminant content is important.
The filtration accuracy is 0.001 µm. Thanks to such precise separation, the membrane retains very fine contaminants that ordinary mechanical cartridges do not remove.
Yes. The membrane removes dissolved salt compounds from water, which allows hardness to be reduced by over 90%.
Appropriate pre-filters should be used to protect the membrane from excessive contaminant load. Proper protection can extend its service life up to several years.
Yes. When replacing the membrane, the flow restrictor on the tube discharging contaminated water to the sewer must also be replaced.
Service life depends on the operating standard, inlet water quality, and random situations such as excessive contamination of well water or a failure in the water supply network.
TFC-75F Aquafilter is an osmotic membrane for reverse osmosis systems. It provides very precise water purification by retaining most dissolved organic and inorganic contaminants, including bacteria and viruses. It also reduces salt content, which results in a significant decrease in hardness. It is suitable for drinking water and aquarium applications. Pre-filters are required for long-term operation.