Skip to content
← Back to article list

Installing a reverse osmosis system yourself - from delivery to commissioning [Case Study]

What does installing a reverse osmosis system yourself look like in practice? A customer describes preparing the kit, installing it under the sink and starting the system for the first time.

Customer story - reverse osmosis

Marcin was looking for a reverse osmosis system that could be installed efficiently beneath the sink. On delivery, he found the unit largely prepared for installation and completed the remaining tasks himself.

Solution Reverse osmosis system
Installation By the customer
Preparation Approximately 95% assembled
Result Leak-free installation

The challenge: an RO system that can be fitted sensibly beneath the sink

When installing a system yourself, filtration parameters are not the only consideration. Set preparation, tube lengths and clear instructions also matter.

For Marcin, these factors directly affected installation and the unit's initial start-up.

The solution: a unit prepared for installation

The system arrived preassembled – approximately 95%, according to the customer. Extra tube length was also provided, allowing the components to be positioned to suit the space beneath the sink.

The customer completed the remaining tasks using the instructions, which he found clear and detailed.

The specialist's perspective

When installing an RO system yourself, work in stages: first plan the unit and tube positions, then make connections according to the instructions, and after start-up check the installation carefully for leaks. Good set preparation reduces the number of tasks the user must carry out.

The result: system started without leaks

After connection, the installation was leak-free. The customer also highlighted good water pressure once the tank had filled and a supply of filters for an extended period of use.

Genuine customer review
“Definitely deserves 5 stars. First, a very clear website with plenty of units and comprehensive descriptions. Second, the equipment arrived quickly and was very well packed. Third, the reverse osmosis system was preassembled, which was a pleasant surprise (preassembled – about 95%?), with plenty of tube length left, so the whole unit could be fitted sensibly without worrying about hose length. The instructions are very clear and detailed. Nothing leaks after connection, and once the tank fills, the water pressure is quite strong. A complete system with filters for two years, so I do not have to remember to order filters for a good while. Highly recommended.”
Marcin Balcerczak Customer review on Google
Considering installing an RO system yourself?

Before purchase, check not only unit parameters but also installation method and instruction availability. See unit instructions or contact the service team, if you need technical help.

Wondering whether RO is needed?

Which water problem do you want to solve?

Start with the problem or water test result. Only then should the filtration technology be selected.

5.0/5 · 1 ratings
Rate this article
Share Facebook X