Free delivery in Poland from 200 zł
14 days to return your order
Efficient order processing
Technical support 24/7!
Over 27 years of experience
Quick coupling tees
A4SRT4-W tee connector 1/4T x 1/4T x 1/4W
Rating
A4SRT4-W T-piece connector for installation on a 1/4" (6.4 mm) hose: two quick-connect type connections for the hose and one 1/4" femal Read moreShow less
A4SRT4-W T-piece connector for installation on a 1/4" (6.4 mm) hose: two quick-connect type connections for the hose and one 1/4" female connection. Used, among others, in under-sink water treatment systems, including reverse osmosis. The hose installation involves pushing it in fully, without twisting and without Teflon tape.
Specifications
ST14T14T14W
In stock
- Accessory type
- Fitting
- Compatibility
- Universal RO systems
- Fitting type
- Tee
- Model
- A4SRT4-W
- Product type
- Quick fitting
- Thread size
- 1/4″
View full specifications
- Tube outer diameter
- 1/4″
Description
A4SRT4-W tee connector 1/4T x 1/4T x 1/4W is a practical connecting component for water installations based on 1/4" (6.4 mm) tubing, used among others in systems such as reverse osmosis, osmotic filter, water filter, and an advanced water filtration system under the sink. The tee connector allows convenient splitting of the water flow, and thanks to the quick-connect fittings, installation is straightforward, without twisting the tubing and without using Teflon tape on hose connections.
The A4SRT4-W model is equipped with two quick-connect fittings for 1/4" tubing and one 1/4" W fitting. This solution makes it easy to expand the installation, connect an additional water outlet point, or split treated water into two directions, e.g. to a separate faucet and a refrigerator.
What is the A4SRT4-W tee connector used for?
The A4SRT4-W tee connector is used for connecting and splitting lines in installations that use 1/4" (6.4 mm) tubing. It is a component often used in under-sink water treatment systems, including those where a reverse osmosis system or another reverse osmosis filter is operating.
Thanks to the 1/4T x 1/4T x 1/4W configuration, the connector makes it easy to add an extra branch to the installation or connect sections of tubing according to the layout of a specific device. It is a small but very important component wherever tightness, orderly installation, and the ability to expand the system without complex work matter.
Main advantages
- designed for 1/4" (6.4 mm) tubing, commonly used in water treatment systems,
- two quick-connect fittings for tubing,
- one 1/4" W fitting,
- fast installation by pushing the tubing in until it stops,
- no need to twist the connection on the tubing,
- no need to use Teflon tape when installing the tubing in the quick connector,
- the ability to conveniently split water in the installation,
- use in under-sink filtration systems and RO systems.
Application in filtration systems
The A4SRT4-W tee connector is used wherever it is necessary to split water flow or organize the routing of lines in a compact installation. It is especially useful in systems mounted under the sink, where the working space is limited and the piping layout should remain clear and leak-tight.
Example applications include:
- splitting treated water in a reverse osmosis system to two water draw-off points,
- splitting water to a refrigerator,
- use in under-sink water treatment systems,
- use in installations where reverse osmosis or an osmotic filter is operating.
Installation and connection method
Attaching the tubing in this connector consists of pushing it into the fitting until it stops. There is no need to additionally twist the line or seal the connection with Teflon tape for the sections connected to the quick connector. This solution speeds up installation and makes system servicing easier.
During installation, the 1/4" tubing should be inserted straight in and pushed in until it stops so that the connection is properly seated. The tee connector is intended for installations based on 1/4" (6.4 mm) lines and for systems used in water filtration and treatment systems.
Why is this component important in an RO system?
In installations such as an under-sink water filter or a reverse osmosis system, even small components have a large impact on the convenience of using the entire setup. A properly selected tee connector helps safely distribute water, prepare a branch for an additional outlet, and maintain compatibility with popular 1/4" lines.
The A4SRT4-W works well both when creating a new installation and when modifying an already operating system. It is a practical solution for those who want to split treated water without using complicated adapters.
Technical specifications
| Model | A4SRT4-W |
|---|---|
| Component type | Tee connector / quick connector |
| Connection designation | 1/4T x 1/4T x 1/4W |
| Line compatibility | 1/4" tubing (6.4 mm) |
| Type of quick-connect fittings | For 1/4" tubing |
| Additional connection | 1/4" W |
| Application | Under-sink water treatment systems, including RO systems |
| Tubing installation method | Push in until it stops |
| Need to twist during tubing installation | No |
| Need to use Teflon tape during tubing installation | No |
Questions
What tubing does the A4SRT4-W connector fit?
The A4SRT4-W model is designed for installation on 1/4" (6.4 mm) tubing. Two fittings are quick-connect fittings for this type of line.
Is this tee suitable for a reverse osmosis system?
Yes, the connector is used in under-sink water treatment systems, including reverse osmosis installations. It can function as a component that splits the water flow in an RO system.
What does the 1/4T x 1/4T x 1/4W designation mean?
The designation indicates the fitting configuration: two 1/4T fittings are intended for connecting 1/4" tubing in a quick-connect system, and the third fitting is marked 1/4W.
How do you install the tubing in the quick connector?
The tubing should be inserted straight into the fitting and pushed in until it stops. This installation method does not require twisting the line.
Do you need to use Teflon tape during installation?
When installing the tubing in the quick connector, there is no need to use Teflon tape. The line connection is sealed by the quick-connect design.
What can this tee connector be used for in practice?
The tee connector can be used, among other things, to split treated water into two draw-off points, as well as to route water to a refrigerator or another additional outlet point within a water filtration system.
Will the A4SRT4-W tee connector 1/4T x 1/4T x 1/4W work for an under-sink water setup?
Yes, it is a component intended for under-sink water treatment systems. It works well in compact installations where line splitting or arranging the connection layout is needed.
What are the main benefits of using this connector?
The key advantages are fast installation, compatibility with popular 1/4" tubing, no need to twist the line connection, and the ability to easily split water in a filtration or osmosis system.