Free delivery in Poland from 200 zł
14 days to return your order
Efficient order processing
Technical support 24/7!
Over 27 years of experience
Quick coupling tees
A4MBT4-W tee connector 1/4T x 1/4GZ x 1/4T
Rating
A4MBT4-W tee 1/4T x 1/4G x 1/4T for water treatment installations. It has two quick connectors for a 1/4" (6.4 mm) hose and an external Read moreShow less
A4MBT4-W tee 1/4T x 1/4G x 1/4T for water treatment installations. It has two quick connectors for a 1/4" (6.4 mm) hose and an external thread of 1/4". It allows for the splitting of the water line, e.g., in under-sink systems and reverse osmosis. The hose is installed by pushing it in fully, without twisting; Teflon tape is only required on the threaded part.
Specifications
ST14T14GZ14T
In stock
- Accessory type
- Fitting
- Compatibility
- Universal RO systems
- Connection size
- 1/4″
- Fitting type
- Tee
- Material
- Plastic
- Model
- A4MBT4-W
View full specifications
- Product type
- Quick fitting
- Thread gender
- Male
- Thread size
- 1/4″
- Tube outer diameter
- 1/4″
Description
A4MBT4-W tee connector 1/4T x 1/4GZ x 1/4T is a practical component for splitting water lines in water treatment installations such as reverse osmosis, osmosis filter, reverse osmosis system, or an under-sink water filter. The model is equipped with two quick connectors for 1/4" (6.4 mm) tubing and a 1/4" male thread, making it suitable wherever a secure and convenient flow split is needed. Tubing installation is quick and does not require tightening, and PTFE tape is used only on the threaded part.
Tee connector for water distribution in filtration systems
A4MBT4-W is designed for use in installations where two sections of 1/4" tubing need to be connected with a 1/4" threaded connection. This solution is often used in domestic water treatment setups, especially in under-sink systems and RO installations.
The tee connector makes it easier to expand and reorganize an existing setup, helping route water lines neatly and functionally in places where tightness, ease of installation, and compatibility with popular 1/4" tubing matter.
Application
The A4MBT4-W tee connector is used in under-sink water treatment systems, including reverse osmosis filter installations and other setups where a water filtration system is used.
Example applications include:
- splitting mineralized and demineralized water,
- splitting water to the tank in reverse osmosis,
- other configurations requiring division of the water line in the installation.
Thanks to this design, the component can be helpful both when building a new setup and when upgrading an already operating water treatment unit or a circuit in which water is being mineralized.
Construction and connection method
The tee connector has two quick-connect fittings for 1/4" (6.4 mm) tubing and one 1/4" male thread. This configuration makes it easy to connect flexible lines to a threaded component without using complicated adapters.
To secure the tubing, insert it into the fitting until it stops. There is no need for additional tightening or sealing the quick-connect sockets with PTFE tape. Additional sealing with PTFE tape is required only on the threaded part.
During installation, the tubing should be inserted straight in until fully seated. PTFE tape is used only on the 1/4" male thread. There is no need for additional tightening or wrapping tape on quick-connect joints.
Key benefits
- allows convenient splitting of the water line in the installation,
- fits popular 1/4" (6.4 mm) tubing,
- equipped with a 1/4" male thread,
- speeds up installation thanks to quick connectors,
- does not require tightening the tubing during connection,
- works well in installations such as a water filter, osmosis filter, and reverse osmosis system,
- made of high-quality plastic.
Material
The A4MBT4-W model is made of high-quality plastic. This material is commonly used in connecting elements of water treatment systems due to its low weight, ease of installation, and good compatibility with typical tubing installations.
Technical specifications
| Model | A4MBT4-W |
|---|---|
| Product type | Tee connector |
| Connection configuration | 1/4T x 1/4GZ x 1/4T |
| Quick connectors | 2 x for 1/4" (6.4 mm) tubing |
| Thread | 1/4" male |
| Application | Under-sink water treatment systems, including reverse osmosis systems |
| Tube installation method | Insert until it stops, without tightening |
| Sealing | PTFE tape required only on the threaded part |
| Material | High-quality plastic |
FAQ
What is the A4MBT4-W tee connector used for?
It is a connector designed for splitting water lines in water treatment installations. It works especially well in under-sink systems and reverse osmosis systems.
What connections does this tee connector have?
The A4MBT4-W model has two quick connectors for 1/4" (6.4 mm) tubing and one 1/4" male thread.
Does this tee connector fit RO systems?
Yes, it is used in reverse osmosis systems and other installations that use 1/4" tubing and 1/4" threaded connections.
How do you install the tube in the quick connector?
The tubing should be inserted straight into the quick connector socket until it stops. The connection does not require tightening.
Do you need to use PTFE tape?
Yes, but only on the threaded part. PTFE tape is not needed on quick-connect joints.
What can it be used for in an installation?
The tee connector can be used, among other things, to split mineralized and demineralized water and to split water to the tank in a reverse osmosis system. It is also suitable for other configurations requiring division of the water line.
What material is the connector made of?
The tee connector is made of high-quality plastic.
Is the product suitable for expanding an existing water filter?
Yes, the connector can be used when modifying or expanding an installation if the system uses compatible 1/4" tubing and a 1/4" threaded connection.