Skip to content
Free delivery in Poland from 45.40 €
14 days to return your order
Efficient order processing
Technical support 24/7!
Over 27 years of experience
Water softeners and iron removers

Automatic pH-raising water filter — WODARO pH Balance 40

Rating 
WODARO PH BALANCE 40 L raises water pH and reduces corrosiveness. 40 l of dolomite media, flow 0.5 m³/h. Water backwashing uses no salt Read moreShow less

WODARO PH BALANCE 40 L raises water pH and reduces corrosiveness. 40 l of dolomite media, flow 0.5 m³/h. Water backwashing uses no salt; spent media needs topping up or replacement.

Benefits

  • Raises excessively low water pH

Specifications

In stock
Connection size
1″
Maximum flow
0.5 m³/h
Maximum working pressure
6 bar
Maximum working temperature
30 °C
Media volume
40 l
Minimum working pressure
2 bar
View full specifications
Minimum working temperature
2 °C
Product type
pH correction station
Solution type
Whole house / POE
Iron reduction
No
Manganese reduction
No
Technology
Media filtration

Description

WODARO pH Balance 40 is an automatic water filter for raising pH, fitted with 40 litres of dolomite media and a BNT control valve. It corrects acidic water, making it less corrosive and easier to treat further, including for iron and manganese removal.

WODARO pH Balance 40 — an effective solution for low water pH

Water with excessively low pH is acidic and can accelerate corrosion of plumbing, fittings and pressure tanks. Acidic conditions also make it harder to remove iron and manganese compounds effectively in subsequent treatment stages.

The pH-raising filter WODARO pH Balance 40 is designed to correct the pH of such water. It is a solution for installations where analysis has identified low pH that needs to be raised before further treatment or distribution through the plumbing system.

How does a pH-raising water filter work?

The filter vessel is filled with specially prepared dolomite media. On contact with water, the media releases calcium carbonate and magnesium oxide, raising the pH. As a result, the water becomes more alkaline and less corrosive.

WODARO pH Balance 40 is not an iron or manganese removal filter. Its purpose is to correct pH, potentially providing better conditions for iron and manganese removal by appropriately selected equipment further downstream.

Key benefits WODARO pH Balance 40

  • Raises water pH using naturally acting dolomite media.
  • Reduces water corrosiveness caused by its acidic pH.
  • Facilitates further treatment of water containing iron and manganese compounds.
  • Operates automatically thanks to the BNT control valve.
  • Automatically backwashes the media, removing trapped sediment and loosening the media bed.
  • Contains 40 litres of media and provides a flow rate of up to 0.5 m³/h.
  • It has a durable vessel made from polyethylene and epoxy resin reinforced with fibreglass.

Automatic BNT control valve

The BNT valve controls automatic operation and media backwashing. During backwashing, water flows in the opposite direction to normal service flow, cleaning sediment from the media and loosening the bed.

Backwash water must be discharged to the sewer. Each cycle does not need to be started manually during normal use.

Important: backwashing does not restore the media's ability to raise pH. The compounds responsible for pH correction are gradually depleted, so the condition and quantity of the media should be checked periodically. The stated media service life is up to 5 years and depends on operating conditions and the quality of the treated water.

Technical data WODARO pH Balance 40

Full model name WODARO pH Balance 
Application Raising water pH
Control valve type BNT
Media type Dolomite media
Media quantity 40 litres
Flow rate 0.5 m³/h
Operating temperature 2–30°C
Connection diameter 1 inch
Operating pressure 2–6 bar
Media service life Up to 5 years
Vessel size 10 × 54 inches
Vessel dimensions A/B 268 / 1381 mm
Vessel material Polyethylene and epoxy resin reinforced with fibreglass

What should be checked before installation?

A pH-raising unit should be selected on the basis of a current water analysis and installation parameters. Check the supply pump's flow rate and delivery head, as both must meet the system's requirements.

Correct installation requires a raw-water supply, a treated-water outlet and a sewer connection for backwash water.

FAQ

What is WODARO pH Balance 40 used for?

The unit raises excessively low water pH. This reduces water corrosiveness and improves conditions for further treatment.

Does this filter remove iron and manganese?

No. WODARO pH Balance 40 corrects water pH but does not replace an iron or manganese removal filter. Raising pH can, however, help appropriately selected downstream equipment remove these compounds.

How is water pH raised?

Water flows through dolomite media that releases calcium carbonate and magnesium oxide. This process raises the water's pH.

Does the unit operate automatically?

Yes. The model WODARO pH Balance 40 has a BNT valve that controls filter operation and media backwashing.

Is salt or a regenerating agent required for backwashing?

The media is backwashed with water flowing in the opposite direction to normal service flow. This cleans and loosens the bed but does not restore its depleted ability to raise pH.

How long does dolomite media last?

The manufacturer states a service life of up to 5 years. Actual service life depends on water parameters, usage intensity and operating conditions.

Is a water test required before purchase?

Yes. A current analysis establishes the extent of the low-pH problem and helps select the appropriate vessel size and other treatment stages.

Write your review

Automatic pH-raising water filter — WODARO pH Balance 40

Automatic pH-raising water filter — WODARO pH Balance 40

WODARO PH BALANCE 40 L raises water pH and reduces corrosiveness. 40 l of dolomite media, flow 0.5 m³/h. Water backwashing uses no salt; spent media needs topping up or replacement.

734.95 € Add to cart