Free delivery from 200 zł
14 days to return your order
Fast delivery in 1-2 days
Technical support 24/7!
Over 27 years of experience
Water leak sensors
Water Flood Sensor for Wireless Water Shut-off Valve 4 PCS.
Rating
Wireless flood sensors for cooperation with a water shut-off valve. When the sensor probes come into contact with water, the device sen Read moreShow less
Wireless flood sensors for cooperation with a water shut-off valve. When the sensor probes come into contact with water, the device sends a signal to the controller, which may result in the closure of the ball valve and the interruption of the water supply behind the valve. The waterproof design helps protect the electronics from corrosion. Set: 4 pcs.
Specifications
ANTYZAL-CZUJNIK-X4
999 Items
- Stan
- Nowy
- Stan opakowania
- oryginalne
- EAN
- 5905031172458
- Kod producenta
- Czujnik Zalania Wody
- Marka
- inny
- Zawiera baterie
- tak
View full specifications
- Seria
- Systemy Antyzalaniowe na Wejście Instal.
- Rodzaj czujnika
- zalania
- Accessory type
- Water leak sensor
- Application
- Industrial
- Product type
- Leak sensor
Description
Water Flood Sensor for Wireless Water Shut-off Valve 4 PCS. is a practical set of wireless sensors designed to work with a water shut-off valve. When the sensor detects contact with water, it sends a signal to the controller, which can result in closing the ball valve and shutting off the water supply behind the valve. This solution increases the safety of installations in homes, service premises, and technical facilities, especially where a water filter, water filtration system, reverse osmosis filter, or reverse osmosis system is in use.
The set includes 4 sensors. The waterproof design helps protect the electronics against corrosion, and wireless communication makes it easy to place the sensors in areas most exposed to water accumulation during a leak.
Effective protection against the consequences of a leak
The wireless flood sensor is installed where water appears the fastest in the event of a failure or leak. This allows the system to react faster to an uncontrolled leak and reduce the risk of damage to floors, furniture, built-ins, and installation components.
The product has been designed to protect against water leaks in domestic, commercial, and industrial water supply and sewage systems. It is a useful support wherever even a small leak can lead to costly material damage.
How the flood sensor works
When the probes of the flooded sensor come into contact with water, current begins to flow between the probes. As a result, the sensor sends a wireless signal to the controller.
After receiving the signal, the control system can cause the ball valve to close, thereby shutting off the water supply behind the valve. This operating principle helps respond more quickly to failures and limit the effects of flooding.
The control valve can receive a signal from up to 5 sensors at the same time, allowing you to expand protection with several detection points in one installation.
Main advantages
- wireless communication with the control system,
- compatibility with a water shut-off valve,
- automatic response when the probes detect contact with water,
- waterproof design helping protect the internal circuit against corrosion,
- use in domestic, commercial, and industrial installations,
- ability to protect several leak-prone areas.
Where it works best
Water supply system components are exposed to leaks, especially when water pressure is too high or hydraulic connections have been made incorrectly. In such situations, even a seemingly minor leak can eventually lead to serious damage.
Sensors are worth placing in high-risk zones, for example near valves, next to devices connected to the water system, and near systems responsible for water treatment. They also work well where reverse osmosis, an osmosis filter, or another system requiring constant monitoring of connection tightness is operating.
Installation and use
The sensor should be installed in a place where water accumulates the fastest during a leak. Proper placement of the sensors is crucial for the effectiveness of the entire protection system.
For the system to work properly, the sensors should be placed at points most exposed to the appearance of water. In practice, these are usually areas near devices and hydraulic connections where a leak will be detected as early as possible.
The wireless form of communication makes it easier to place the detectors without the need for additional cabling. This is a convenient solution when modernizing an existing installation and when protecting several zones located far from one another.
Use in different types of installations
The product is intended for protection against water leaks in water supply and sewage systems. It can be used in apartments, single-family houses, commercial premises, technical rooms, and industrial facilities.
This is a useful solution wherever the safety of the installation matters for the continuity of device operation and the protection of equipment. The sensors can be an important addition in places where a water shut-off valve and systems related to the distribution or preparation of domestic water are used.
Package contents
- 4 water flood sensors.
Technical specification
| Product type | wireless water flood sensor for use with a water shut-off valve |
|---|---|
| Quantity in set | 4 pcs. |
| Operating principle | after the probes contact water, the sensor sends a signal to the controller |
| System response | possibility of closing the ball valve and shutting off the water supply behind the valve |
| Communication | wireless |
| Housing design | waterproof |
| Electronics protection | protection against corrosion of the internal circuit |
| Intended use | protection against water leaks |
| Application area | domestic, commercial, and industrial water supply and sewage systems |
FAQ
What is this water flood sensor used for?
The sensor is used to detect the presence of water at the installation site and send a signal to the controller. This allows the system to trigger a protective response, including closing the ball valve and shutting off the water supply behind the valve.
How is a leak detected?
When the sensor probes come into contact with water, current starts flowing between them. This triggers a wireless signal to the controller working with the shut-off valve.
Where is it best to install the sensors?
It is best to place them where water collects the fastest during a leak. Typical locations include areas near water devices, hydraulic connections, valves, and zones near water treatment and distribution installations.
How many sensors are included in the set?
The set contains 4 wireless water flood sensors.
How many sensors can the control valve work with?
The control valve can receive a signal from up to 5 sensors at the same time, which allows protection to be extended to several points in the installation.
Is the sensor suitable for home and commercial use?
Yes. The product is intended to protect against water leaks in domestic, commercial, and industrial water supply and sewage systems.
Is the housing resistant to moisture?
Yes, the sensor has a waterproof design that helps protect the internal circuit against corrosion. This is important in an environment where moisture or contact with water may occur.
Is such a sensor worth using with water filtration systems?
Yes, it is a practical solution near installations where a water filter, water filtration system, reverse osmosis filter, or reverse osmosis system is used. In such places, early detection of a leak helps reduce the risk of flooding and damage.