1'' FHPR1-B1-AQ cartridge water filter housing

FHPR - 10" two-part inline housing by Aquafilter® designed for pre-filtration. It consists of two parts: a transparent housing and a head with a 1" brass thread. The housing is equipped with two sealing O-rings (end and under the head), which ensure maximum tightness of the product. The set includes 2 cartridges designed for mechanical filtration, an antibacterial centering disk, a wrench for unscrewing the filter housing, and Teflon tape.

The transparent housing allows for assessing the condition of the cartridge contamination. The housing is equipped with a vent valve that allows for the release of air trapped in the filter after replacing the cartridge.

FHPR-B1 can be mounted individually or connected in series. The housing is installed on the pipe supplying cold water to the apartment (in case of moderate water demand). It can also be installed before expensive household appliances (washing machine, dishwasher), effectively protecting them from the accumulation of various types of contaminants.

It works with a wide range of mechanical, specialized, and carbon cartridges (softening, de-ironing, antibacterial) 10” available on the market.

For proper installation, the housing should be suspended on a mounting plate. Not installing the plate will additionally burden the installation with the weight of the filter. The set is offered with a blue mounting plate FXBR1PN and a wrench FXWR1-BL.

Advantages:

• Excellent tightness of the connection (two O-rings)

• Possibility of connecting housings in series

• Transparent casing facilitates assessment of the cartridge contamination state

• Compatible with most 10” cartridges available on the market

• Housing equipped with a vent

• Brass insert

• Housing and head made of high-quality materials

• Set includes a wrench, plate, and filter cartridge

Applications:

• Domestic water installations

• Industrial water installations

The set includes 2 sediment cartridges

Cartridges made of polypropylene non-woven fabric, produced using "Melt - blown" technology. Made of 100% pure polypropylene (without any additives). The cartridges remove mechanical contaminants such as: sand, rust, and suspensions.

The lifespan of the cartridge is estimated at 3-6 months depending on the degree of contamination of the incoming water.

An antibacterial centering disk is included in the set.

The disk is made using BACInix™ antibacterial technology utilizing nanosilver, which is a bacteriostatic agent preventing the growth of microorganisms inside the filtration system, allowing for extended operational time and protecting against microbiological contamination.

Centering disk:

• facilitates proper installation of the cartridge

• prevents the growth of bacterial flora

• reduces the risk of pathogenic microorganisms development

• made from the highest quality materials in the European Union

• compatible with most cartridges available on the market

• ensures correct positioning of the cartridge during component assembly

• reduces the likelihood of damaging the cartridge during installation

• BACinix technology based on nanosilver provides antimicrobial protection

The set includes:10” inline housing FHPR1-B1

• FXBR1PN mounting plate with four screws

• FXWR1-BL wrench

• 2 x polypropylene cartridge 5 micron (can be replaced with 20 micron cartridges, please provide information after purchase)

Technical data:

• Housing type: Two-part

• Dimensions (height x diameter) (mm): 10 inches

• Thread diameter (inch): 1"

• Operating temperature (°C): 2 - 45

• Max. operating pressure (bar): 6

• Material of transparent housing: PET

• Material of head: PP (Polypropylene)

• Number of O-rings under the head: 2

• Cartridge dimensions: 9 7/8 x 2 1/2 (25 cm x 6.5 cm)

• Vent: Yes