- There are no more items in your cart
- Shipping
- Total 0.00 zł
Over 15 years in business
Over 1.5 million satisfied customers
Free shipping
Fast shipping
14-day returns
Technical support
- Water filters
- Reverse osmosis
- Reverse osmosis systems (filters)
- Osmosis filters
- RO10 filter cartridges
- RO3 filter cartridges
- RO4 filter cartridges
- RO5 filter cartridges
- RO6 filter cartridges
- RO7 filter cartridges
- RO8 filter cartridges
- RO9 filter cartridges
- Reverse osmosis cartridge sets
- Pre-filters for reverse osmosis
- Inline cartridges for reverse osmosis
- Mineralizers for reverse osmosis
- Carbon cartridges for reverse osmosis
- Mechanical cartridges for reverse osmosis
- Osmotic membranes
- Parts and accessories for reverse osmosis
- Water pumps
- Pressure tanks for osmosis
- RO faucets and taps
- Quick connectors for reverse osmosis
- Hoses, filter tubes
- Water valves
- Flow restrictors
- Water connections
- Membrane housings and RO filter housings
- RO filter keys
- RO filter holders
- Mounting plates for osmosis
- Seals for RO systems
- Water leak sensors
- Pressure gauges for reverse osmosis
- RO system disinfection
- Akcesoria do złączek i przewodów RO
- Filter cartridges
- Carbon
- Antibacterial
- To the pitcher, filtering bottle
- Linear
- Mechanical
- Deionizing
- Softening
- Insert sets
- Capillary membranes
- Wkłady do butelek filtrujących
- Wkłady do filtrów prysznicowych
- Wkłady do filtrów nakranowych i nablatowych
- Wkłady do filtrów pod zlew
- Wkłady Big Blue 10"
- Wkłady Big Blue 20"
- Puste wkłady i puszki do zasypu
- Wkłady do filtrów Cintropur
- Wkłady do filtrów urządzeń AGD
- Wkłady do usuwania azotanów
- Water softeners and iron removers
- Water demineralization
- UV bactericidal lamps
- Testers, water meters
- Pool and Spa
- Aquarium filters
- Drinking water devices
- Coffee machines
- Breathalysers
- Accessories, parts, and others
- Batteries, faucets, spouts
- Hydraulic articles
- Septic tank products
- Descaling liquids
- Thermal mugs and bottles
- Others
- Descaling tablets
- Condensate neutralisers for boilers
- Leak protection systems and shut-off valves
- Zestawy podłączeniowe do lodówek i kostkarek
- Parts for inline filter housings and filters
- Technical and service items
- Tabletki do czyszczenia ekspresów
- Odkamieniacze w proszku i saszetkach
- Water problems
- Hard water and limescale
- Iron and rust in water
- Sand and sediment in water
- Chlorine and bad water taste
- Bad water smell
- Bacteria in water
- Cloudy water
- Well water
- High TDS in water
- Dry skin after bathing
- Dry and dull hair after washing
- Stains on shower glass and fittings
- Limescale in the washing machine
- Limescale in coffee machine and kettle
- Rough laundry and stiff towels
- Spots on dishes after dishwasher
- Clogging of aerators
- Limescale in boiler and water heater
- Metallic taste of water
- Yellow tap water
- Brown water after opening the tap
- Black sediment in water
- Manganese in water
- Ammonium in water
- Nitrates and nitrites in water
- Water for baby and child
- Microplastics in water
- Pesticides, medicines and organic compounds
- PFAS in drinking water
- Service & installation
- B2B
Tank valve 1/4T x 1/4GZ
ZZ14T14GW-B
651815095011
Rating
Metal ball valve for connecting water supply to filters. Used with a water connection of the appropriate diameter, it creates a tee that facilitates integration into the installation. Fits connections with a mounting hole of 1/4 inch. Outer thread 1/4 inch. The hose connection is made by sliding it onto the spigot and tightening with the nut from the set. The threaded connection should be sealed with, for example, Teflon tape.
Description
Tank valve 1/4T x 1/4GZ is a metal ball valve for connecting the water supply in filtration systems. It works well as a mounting component in solutions such as a water filter, reverse osmosis filter, reverse osmosis system, or other systems designed for water treatment. Combined with the proper water connector, it creates a practical tee that makes it easy and convenient to connect the filter to most water installations.
The model fits connectors equipped with a 1/4-inch mounting hole, has a 1/4-inch external thread, and allows a hose to be connected by sliding it onto the spigot and tightening it with the nut included in the set. It is a durable and functional solution for water filtration systems that require reliable shut-off or water supply.
Application and intended use
The metal 1/4T x 1/4GZ ball valve is designed for connecting the water supply to a filter. It is most often used in installations where convenient connection of the filtration system to an existing water network is required.
It is a practical mounting component used both in home filtration systems and in popular solutions such as reverse osmosis, an osmosis filter, or a classic under-sink water filtration system.
How it works and where it performs well
The valve is typically used together with a water connector of the appropriate diameter. Once these elements are connected, a tee is created that enables connection to most water installations. As a result, installing a water filter becomes simpler and more organized.
The product fits water connectors from various manufacturers, provided they use a 1/4-inch mounting hole. This is an important practical feature because it makes the component easier to match with many popular filtration sets.
Construction and connection method
The valve has a 1/4-inch external thread, which is approximately 11 mm. On the hose side, there is a mushroom-type spigot onto which the hose should be pushed. The whole connection is then tightened with the nut included in the set.
This installation method is simple and also convenient in everyday use. It works well in systems where quick connection of the line supplying water to the filter matters.
Key product features
- metal ball valve for connecting water supply to filters,
- used together with a water connector of the appropriately selected diameter,
- creates a tee that makes it easier to connect to most water installations,
- fits connectors with a 1/4-inch mounting hole,
- compatible with solutions from various manufacturers using this standard,
- 1/4-inch external thread,
- hose connection by sliding onto the spigot and tightening with a nut,
- nut for hose connection included in the set.
Important installation notes: the hose connection to the valve does not require additional sealing. The threaded connection between the valve and the water connector does require sealing — for example, PTFE tape can be used. Before installation, it is worth making sure that the connector has a 1/4-inch mounting hole and is compatible with the planned installation configuration.
Why choose this valve
In systems such as a reverse osmosis filter or another water filter, not only the performance of the filter cartridges matters, but also the quality of the connection components. A solid metal valve helps create a stable connection to the installation while also allowing convenient organization of the water supply to the filtration system.
Thanks to the standard 1/4-inch size, the product fits well into popular solutions used in home water treatment systems. It is a useful component for people assembling a new set or replacing a worn part in an existing installation.
Set contents
- metal tank valve 1/4T x 1/4GZ,
- nut for tightening the hose connection.
Technical specification
| Type of product | metal ball valve |
|---|---|
| Intended use | connecting water supply to filters |
| Model | Tank valve 1/4T x 1/4GZ |
| Thread | 1/4-inch external |
| Thread diameter | approx. 11 mm |
| Compatible mounting hole | 1/4 inch |
| Hose connection method | sliding onto a mushroom-type spigot and tightening with a nut |
| Sealing the hose-to-valve connection | not required |
| Sealing the threaded connection to the water connector | required, e.g. with PTFE tape |
| Mounting application | with a water connector it creates a tee enabling connection to most water installations |
| Material | metal |
FAQ
What is the 1/4T x 1/4GZ tank valve used for?
The product is used to connect the water supply to filters. It is used as a mounting component in filtration installations, where together with the proper water connector it enables convenient connection of the system to an existing installation.
Does this valve fit reverse osmosis filters?
Yes, the valve can be used in installations such as a reverse osmosis filter, an osmosis filter, or a reverse osmosis system, as long as the other system components are compatible with the 1/4-inch connector standard.
What thread does this valve have?
The valve has a 1/4-inch external thread. The description also gives an approximate diameter of about 11 mm.
What mounting hole does it fit?
The model is designed for water connectors equipped with a 1/4-inch mounting hole.
How do you connect the hose to the valve?
The hose should be slid onto the mushroom-type spigot, and then the connection should be tightened with the nut included in the set. This connection method is simple and convenient during installation.
Does the hose connection to the valve need additional sealing?
No, the hose connection to the valve does not require additional sealing.
Does the threaded connection to the water connector require sealing?
Yes, the connection between the valve and the water connector should be sealed, for example with PTFE tape.
Is the valve compatible with connectors from different manufacturers?
Yes, the valve fits water connectors from various manufacturers if they use a 1/4-inch mounting hole.
What is included in the set?
The set includes the metal valve and the nut needed to tighten the hose connection.
Product Details
ZZ14T14GW-B
78 Items
Data sheet
- Model
- Zawór zbiornika 1/4T x 1/4GZ
- Accessory type
- Valve
- Compatibility
- Universal RO systems
- Connection size
- 1/4″
- Product type
- Valve
- Tube outer diameter
- 1/4″
- Valve type
- Tank ball valve
- Material
- Metal
Metal ball valve for connecting water supply to filters. Used with a water connection of the appropriate diameter, it creates a tee that facilitates integration into the installation. Fits connections with a mounting hole of 1/4 inch. Outer thread 1/4 inch. The hose connection is made by sliding it onto the spigot and tightening with the nut from the set. The threaded connection should be sealed with, for example, Teflon tape.