- Temporarily out of stock
Free delivery in Poland from 200 zł
14 days to return your order
Efficient order processing
Technical support 24/7!
Over 27 years of experience
Parts and accessories for water treatment stations
UPPER BASKET 3/4 INCH FOR BOTTLE HEAD OF TREATMENT STATION GLUED
Rating
Upper basket 3/4 inch for bottles and water treatment station heads. Installed inside the tank on the distribution pipe, it protects th Read moreShow less
Upper basket 3/4 inch for bottles and water treatment station heads. Installed inside the tank on the distribution pipe, it protects the controller from the ingress of substrate particles into the nozzles and moving parts. Version for gluing, intended for heads with a standardized profile (not for heads with hooks, so-called teeth).
Specifications
- Accessory type
- Distributor basket
- Compatibility
- Water treatment stations
- Product type
- Accessory / spare part
Description
Upper basket 1 inch for the treatment station head, glued in, is an important protective element mounted on the distribution tube inside the vessel with media. Used in installations such as a water filter, water filtration system, water treatment station or water softener, it helps protect the controller from media particles, supports stable flow, and protects the sensitive parts of the head. The glued-in version is designed for heads with a standardized profile and does not fit models with latches, the so-called teeth.
What is the 1-inch upper basket used for?
The upper basket for a 1-inch distribution tube operates inside a tank filled with filtration or treatment media. It is mounted on the lower part of the head, i.e. near the controller, to reduce the risk of fine media fractions entering the system.
This is a small but very important element in devices responsible for water treatment. Its task is to retain fine filtration media particles while maintaining unrestricted water flow. As a result, the head can operate stably, and the internal channels and moving components are better protected against contamination.
Key practical benefits
In systems where water flows through the media under pressure, even small particles can negatively affect the operation of the head. A properly selected upper basket helps reduce this risk and supports correct operation of the entire system.
- protects the controller from particles of filtration media,
- supports efficient water flow through the system,
- helps protect the nozzles and moving parts of the head,
- is suitable for many types of water treatment stations,
- is designed for installation on standardized head profiles.
Where is it used?
This model can be used in various devices in which filtration or treatment media operate and the head requires effective protection against fine particles of the medium. It is suitable, among others, for the following installations:
- water softeners,
- iron removers,
- manganese removers,
- carbon columns,
- other treatment stations equipped with a suitable head and a 1-inch distribution tube.
It is a universal service and installation component for many treatment systems where safe flow and protection of control components matter.
Design and operating principle
The basket is equipped with longitudinal openings of a fraction of a millimeter in width. This design allows water to flow freely through the system while effectively limiting the passage of media particles into the head.
This is highly important in installations where the reliability of the controller, the openness of flow channels, and the condition of moving elements directly affect the proper operation of the entire station. A precisely manufactured upper basket helps maintain system efficiency and supports a longer service life of the components in contact with water.
Installation note: this is a glue-in version for standardized head profiles. The product does not fit heads equipped with latches, the so-called teeth. Before purchase, it is worth comparing the fastening method with the element used in your treatment station.
Compatibility and selection before purchase
When replacing a worn upper basket, two basic parameters should be checked: the distribution tube diameter and the mounting type. This model is designed for a 1-inch distribution tube and for glued-in installation.
It will not be suitable for snap-on solutions or for heads with characteristic latches. Correct selection matters not only for installation itself, but also for maintaining proper controller protection and stable operation of the entire water treatment system.
Depending on the delivery batch, the appearance of the element may differ from the one shown in the photo, but its functionality and intended use remain the same.
Why replace a worn upper basket?
A worn, damaged, or incorrectly selected upper basket can reduce head protection and increase the risk of media particles entering the controller. In practice, this may affect the operating smoothness of the device, the condition of moving parts, and the durability of the entire system.
Replacing it with the correct model is a simple way to maintain proper operation of the treatment station and reduce the risk of unplanned service issues.
Technical specifications
| Parameter | Value |
|---|---|
| Product type | Upper basket |
| Distribution tube diameter | 1 inch |
| Intended use | Protection of the head and controller against media particles |
| Mounting location | Lower part of the head, inside the tank with media |
| Mounting method | Glued in |
| Profile compatibility | Standardized head profiles |
| Compatibility with heads with latches | No |
| Slot design | Longitudinal openings of a fraction of a millimeter in width |
| Application | Softeners, iron removers, manganese removers, carbon columns and other treatment stations |
| Notes | The product appearance may differ from the photo depending on the delivery |
FAQ
What is the 1-inch upper basket used for?
The upper basket protects the head and controller of the treatment station from particles of filtration or treatment media. At the same time, it allows proper water flow through the system.
Which distribution tube does the UPPER BASKET 3/4 INCH FOR BOTTLE HEAD OF TREATMENT STATION GLUED fit?
This model is designed for a distribution tube with a diameter of 1 inch.
Is it a glued-in basket?
Yes, this is a glued-in version, prepared for installation on standardized head profiles.
Does the product fit heads with latches, the so-called teeth?
No. This upper basket is not intended for heads equipped with latches or teeth.
In which devices can this upper basket be used?
The product is used in softeners, iron removers, manganese removers, carbon columns, and other treatment stations with a suitable head and a 1-inch distribution tube.
How does the upper basket protect the treatment station head?
Thanks to longitudinal openings of very small width, it retains fine media particles that could enter the controller, nozzles, or moving parts of the head.
What should be considered before purchase?
The three most important points are: the distribution tube diameter, the mounting method, and the head profile type. This model fits a 1-inch tube and glued-in installation on standardized profiles.
Can the product appearance differ from the photo?
Yes, visual differences depending on the delivery are possible, but the functionality and intended use of the element remain the same.
Why is it worth replacing a worn upper basket?
A worn or damaged basket may protect the controller and head against media particles less effectively. Replacing it with the correct model helps maintain proper device operation and reduces the risk of service issues.