TLC-75 Pentair 75 GPD is an osmotic membrane for reverse osmosis filters. It purifies water very thoroughly, retaining most dissolved organic and inorganic contaminants, as well as bacteria and viruses. It helps reduce hardness and obtain water suitable for drinking and aquarium applications. For longer lifespan, use pre-filters.
TLC-75 Pentair 75 GPD reverse osmosis membrane is a precision cartridge for systems such as reverse osmosis, an osmosis filter, and a reverse osmosis filter. The membrane is responsible for the most precise stage offered by a home water filtration system: it very effectively reduces the presence of dissolved organic and inorganic contaminants, bacteria, viruses, salts, and heavy metals. As a result, it supports water treatment for everyday drinking and aquarium applications, and with proper operation and the use of pre-filters, it can operate for a long time.

Pentair TLC-75 75 GPD is an osmotic membrane designed for reverse osmosis filters. In an RO system, it plays a key role because it is responsible for separating water molecules from a wide range of contaminants dissolved in water.
This solution is used wherever very high water quality matters. The membrane retains from 96% to 99.99% of dissolved organic and inorganic contaminants, bacteria, viruses, chemical compounds, and heavy metals with a filtration accuracy of up to 0.001 µm. At the same time, it removes dissolved salt compounds, which translates into a reduction in water hardness of over 90%.
The result of the membrane's operation is ideally purified water suitable for drinking and aquarium use. That is why the osmotic membrane is the most important component used in a reverse osmosis system and a modern water filter based on RO technology.
The membrane consists of multiple layers wound around a perforated core located inside the cartridge. This design makes it possible to achieve a very large filtration area while maintaining compact dimensions typical of membranes used in household RO systems.
Contaminated water is forced under pressure onto the membrane surface. At this stage, water molecules pass through microscopic pores, while contaminants are separated and directed to the drain.
Purified water passes through openings into the central core and then, under pressure, flows out of the membrane as filtered water. Thanks to this process, the reverse osmosis system can effectively lower the level of salts, hardness, and many other undesirable components present in raw water.
TLC-75 Pentair 75 GPD is a good choice for installations where high-quality filtered water is expected. The membrane is particularly suitable for:
For proper membrane operation, it is very important to protect it appropriately with pre-filters. These are the components that reduce the inflow of larger contaminants that could accelerate wear of the osmotic cartridge and reduce filtration effectiveness.
The use of pre-filters can extend membrane service life to as much as several years. However, actual durability depends on operating conditions and feed water quality.
When replacing the membrane, the flow restrictor installed on the hose that discharges contaminated water to the sewer must also be replaced.
Membrane service life refers to standard operation and may change depending on inlet water quality and factors such as excessive contamination of well water or a failure in the water supply network.
The osmotic membrane works most effectively when the incoming water has been properly pretreated. Worn or neglected pre-filter cartridges can shorten membrane service life, reduce filtration performance, and accelerate the buildup of contaminants on its surface.
Regular inspection of the entire system is a simple way to maintain stable operation of the water filter and high water quality after the RO process.
| Model | TLC-75 |
|---|---|
| Brand | Pentair |
| Nominal capacity | 75 GPD |
| Product type | Reverse osmosis membrane |
| Intended use | Reverse osmosis filters |
| Filtration accuracy | 0.001 µm |
| Contaminant reduction efficiency | From 96% to 99.99% |
| Hardness reduction | Over 90% |
| Reduced contaminants | Dissolved organic and inorganic contaminants, bacteria, viruses, chemical compounds, heavy metals, dissolved salt compounds |
| Application | Drinking water, aquariums |
It is an osmotic membrane designed for reverse osmosis filters. It is responsible for very precise water purification by separating water molecules from many dissolved contaminants.
The membrane retains from 96% to 99.99% of dissolved organic and inorganic contaminants, bacteria, viruses, chemical compounds, heavy metals, and dissolved salt compounds.
Yes. The membrane removes dissolved salt compounds from water, thanks to which hardness reduction exceeds 90%.
Yes, the membrane allows you to obtain ideally purified water suitable for drinking. The product is also used in aquarium applications.
Contaminated water is forced under pressure onto the membrane surface. Water molecules pass through microscopic pores, while contaminants are separated and directed to the drain. The purified water then enters the central core and flows out of the membrane.
Pre-filters protect the membrane from excessive contaminant load. Their use helps maintain filtration effectiveness and can extend membrane service life to as much as several years.
Yes. When replacing the membrane, the flow restrictor installed on the hose that discharges contaminated water to the sewer must also be replaced.
Service life depends on the operating standard, inlet water quality, and the installation's operating conditions. It may change, among other things, in the event of excessive contamination of well water or after a failure in the water supply network.
75 GPD is the membrane's nominal capacity designation used in RO systems. This parameter helps select the right cartridge for a compatible reverse osmosis system.
TLC-75 Pentair 75 GPD is an osmotic membrane for reverse osmosis filters. It purifies water very thoroughly, retaining most dissolved organic and inorganic contaminants, as well as bacteria and viruses. It helps reduce hardness and obtain water suitable for drinking and aquarium applications. For longer lifespan, use pre-filters.