- There are no more items in your cart
- Shipping
- Total 0.00 zł
- Water filters
- Reverse osmosis
- Reverse osmosis systems (filters)
- Osmosis filters
- RO10 filter cartridges
- RO3 filter cartridges
- RO4 filter cartridges
- RO5 filter cartridges
- RO6 filter cartridges
- RO7 filter cartridges
- RO8 filter cartridges
- RO9 filter cartridges
- Reverse osmosis cartridge sets
- Pre-filters for reverse osmosis
- Inline cartridges for reverse osmosis
- Mineralizers for reverse osmosis
- Carbon cartridges for reverse osmosis
- Mechanical cartridges for reverse osmosis
- Osmotic membranes
- Parts and accessories for reverse osmosis
- Water pumps
- Pressure tanks for osmosis
- RO faucets and taps
- Quick connectors for reverse osmosis
- Hoses, filter tubes
- Water valves
- Flow restrictors
- Water connections
- Membrane housings and RO filter housings
- RO filter keys
- RO filter holders
- Mounting plates for osmosis
- Seals for RO systems
- Water leak sensors
- Pressure gauges for reverse osmosis
- RO system disinfection
- Akcesoria do złączek i przewodów RO
- Filter cartridges
- Carbon
- Antibacterial
- To the pitcher, filtering bottle
- Linear
- Mechanical
- Deionizing
- Softening
- Insert sets
- Capillary membranes
- Wkłady do butelek filtrujących
- Wkłady do filtrów prysznicowych
- Wkłady do filtrów nakranowych i nablatowych
- Wkłady do filtrów pod zlew
- Wkłady Big Blue 10"
- Wkłady Big Blue 20"
- Puste wkłady i puszki do zasypu
- Wkłady do filtrów Cintropur
- Wkłady do filtrów urządzeń AGD
- Wkłady do usuwania azotanów
- Water softeners and iron removers
- Water demineralization
- UV bactericidal lamps
- Testers, water meters
- Pool and Spa
- Aquarium filters
- Drinking water devices
- Coffee machines
- Breathalysers
- Accessories, parts, and others
- Batteries, faucets, spouts
- Hydraulic articles
- Septic tank products
- Descaling liquids
- Thermal mugs and bottles
- Others
- Descaling tablets
- Condensate neutralisers for boilers
- Leak protection systems and shut-off valves
- Zestawy podłączeniowe do lodówek i kostkarek
- Parts for inline filter housings and filters
- Technical and service items
- Tabletki do czyszczenia ekspresów
- Odkamieniacze w proszku i saszetkach
- Water problems
- Hard water and limescale
- Iron and rust in water
- Sand and sediment in water
- Chlorine and bad water taste
- Bad water smell
- Bacteria in water
- Cloudy water
- Well water
- High TDS in water
- Dry skin after bathing
- Dry and dull hair after washing
- Stains on shower glass and fittings
- Limescale in the washing machine
- Limescale in coffee machine and kettle
- Rough laundry and stiff towels
- Spots on dishes after dishwasher
- Clogging of aerators
- Limescale in boiler and water heater
- Metallic taste of water
- Yellow tap water
- Brown water after opening the tap
- Black sediment in water
- Manganese in water
- Ammonium in water
- Nitrates and nitrites in water
- Water for baby and child
- Microplastics in water
- Pesticides, medicines and organic compounds
- PFAS in drinking water
- Service & installation
- B2B
Single white handle 2.5"
UCHWYT-25
Rating
Single handle in white color for a membrane or filter housing with a diameter of 2.5 inches. Made of flexible plastic, it allows for slight bending and quick insertion of the housing or filter. The profiled reinforcements increase the elasticity and rigidity of the handle, improving the stability of the mounting.
Description
The single white 2.5" holder is a practical mounting element for stable positioning of a membrane housing or filter with a diameter of 2.5 inches. It works well in installations such as water filters, osmosis filters, reverse osmosis systems, and other water treatment systems. The flexible material makes it easy to quickly press the housing into the holder, while the profiled reinforcements improve resilience, rigidity, and mounting security.
Holder for a 2.5" membrane housing or filter
The model in white has been designed for mounting a single membrane housing or filter measuring 2.5". It is a small but very important installation component that helps keep the part in the correct position and organize the layout of the entire filtration system.
The holder is used both in simple filtration sets and in more advanced solutions where an osmosis membrane, reverse osmosis filter, or another water filtration system component operates. Thanks to the appropriately selected flexibility, installation is quick and convenient.
Main advantages
- designed for a 2.5" membrane housing or filter,
- white color matching typical filtration installation components,
- made of flexible plastic,
- allows the holder to be slightly spread during installation,
- quickly presses the filter or housing into the seat,
- profiled reinforcements increasing resilience,
- greater structural rigidity,
- more stable mounting of the installed element.
Flexible material and secure seating
The holder is made of plastic with flexible properties. This means it can be slightly spread to conveniently place the filter or housing inside, without the need for complicated installation. This solution speeds up service work and makes it easier to organize the components within the system.
An additional role is played by the properly shaped profiles made during production. These are responsible for the holder’s proper resilience and rigidity and strengthen its profile. In practice, this translates into better support for the mounted component and greater stability in everyday use.
Application
The single 2.5" holder can be used wherever organized and stable mounting of a cylindrical filter housing or membrane is required. It is a good choice for home and utility installations related to filtration and water treatment.
- mounting a membrane housing,
- mounting a filter housing,
- reverse osmosis installations,
- reverse osmosis system,
- sets with an osmosis membrane,
- various configurations of water filtration systems.
Before installation, make sure that the diameter of the mounted element matches the size of the 2.5" holder. The flexible design makes it easy to seat the housing, but the best stability is achieved with proper diameter matching.
Installation and everyday use
The holder’s design has been developed so that installation is simple and quick. The flexible material allows the holder arms to be slightly bent apart and the housing or filter to be pressed into place. Once seated, the element is stably supported by the holder’s profiled body.
This solution is especially convenient in installations where efficient replacement of components, a clear layout of elements, and secure holding of the housing in a fixed position matter. A properly selected holder helps limit accidental movement of the mounted element.
Why choose this holder
In filtration systems, not only the cartridges, membranes, and housings matter, but also the way they are mounted. The right holder improves the stability of the entire system, makes installation easier, and helps maintain an aesthetically tidy arrangement within the device or enclosure.
This model combines a simple design with the functionality needed in practice. The flexibility of the material makes installation easier, while the profiled reinforcements ensure durable and secure support for the mounted element. As a result, the holder works well as an auxiliary component in filtration and water treatment systems.
Technical specifications
| Parameter | Value |
|---|---|
| Product name | Single white 2.5" holder |
| Intended use | For membrane housing or filter |
| Holder size | 2.5" |
| Color | White |
| Material | Plastic |
| Material properties | Flexible, allowing slight spreading |
| Construction | Profiled reinforcements increasing resilience and rigidity |
| Type | Single holder |
Product Details
UCHWYT-25
9945 Items
Data sheet
- Accessory type
- Clip / holder
- Compatibility
- Universal RO systems
- Product type
- Mounting clip / bracket
- Material
- Plastic
Questions
What is the single white 2.5" holder used for?
The holder is used to mount a membrane housing or filter with a diameter of 2.5". It helps securely seat the element in the installation and organize the filtration system.
Does this holder fit 2.5" filters and housings?
Yes, the holder is designed for elements measuring 2.5", meaning a membrane housing or filter in this size.
What material is the holder made of?
The product is made of plastic. The material is flexible enough to allow the holder to be slightly spread during installation.
Is it difficult to mount the housing in the holder?
No, installation is simple. The flexible design allows the holder to be slightly spread and the filter or housing to be quickly pressed into place.
What is the function of the profiled reinforcements?
The profiled reinforcements increase the holder’s resilience and rigidity. They also strengthen its profile, which improves mounting stability.
Is the holder suitable for reverse osmosis systems?
Yes, it can be used in installations such as a reverse osmosis system, osmosis filter, or other systems where 2.5" membrane housings or filters are mounted.
Is the holder single?
Yes, this is a single holder, intended to mount one 2.5" element.
In what color is the Single white 2.5" holder available?
This model is white, making it a good match for typical housings and components of water filtration systems.
Single handle in white color for a membrane or filter housing with a diameter of 2.5 inches. Made of flexible plastic, it allows for slight bending and quick insertion of the housing or filter. The profiled reinforcements increase the elasticity and rigidity of the handle, improving the stability of the mounting.