Water filters
Filter cartridges
Reverse osmosis
Softeners & Iron Filters
Accessories & Parts
Soda makers
Bestsellers
Wholesale
Soda makers
BLOG
Kontakt
Services
PayU
Tips
WodaRO PP5 is a universal string filter cartridge 10" for pre-filtration of cold and hot water. Made of pure polypropylene fiber with a precision of 5 microns. It captures mechanical impurities (sand, silt, rust), protecting the installation as well as heating devices and household appliances. Designed for 10" cartridge housings and under-sink and RO systems.
PP5 wodaRO 5 micron string cartridge is a universal filter cartridge for the pre-filtration of cold and hot water, intended for standard 10" housings, under-sink installations, and systems such as an osmosis filter, reverse osmosis filter, and other water treatment solutions. It effectively reduces mechanical impurities such as sand, silt, and rust, helping to protect the water system, heating devices, and household appliances. The construction made of pure polypropylene fiber with 5 micron filtration accuracy ensures effective operation, good performance, and low pressure drop.

The WodaRO PP5 string cartridge has been designed as a precise pre-filtration component. Its task is to capture solid contaminants present in water before they reach further treatment stages or devices using water.
This is a practical solution for use as a water filter in standard 10" inline housings, as well as in under-sink systems and RO systems. Thanks to this, the cartridge performs well both as a standalone element of a water filtration system and as protection for subsequent stages used by reverse osmosis or an advanced reverse osmosis system.
The PP5 model is made of pure polypropylene fiber wound around a filtration core. This construction is not accidental. It provides an increase in filter density toward the core, which translates into higher filtration efficiency and better use of the entire volume of the filtration material.
In practice, this means that larger contaminants are retained in the outer layers of the cartridge, while finer particles are captured deeper inside the filter structure. This solution supports longer cartridge operation and helps maintain good performance during use.
The cartridge is intended for removing mechanical impurities from water. It reduces the presence of particles that may impair system operation and accelerate device wear.
This type of filtration helps protect the water system, heating devices, and household appliances against deposits and solid particles that may cause damage or reduce operating efficiency.
PP5 wodaRO is a universal sediment cartridge for cold and hot water treatment. It can be used in:
Thanks to the popular 10" size, the cartridge fits many standard housings used in household and utility filtration systems.
Operating tip: the cartridge should be replaced regularly to maintain filtration efficiency and system protection. Actual service life depends on the level of contamination in the incoming water, so in water with a higher amount of sediment, replacement may be necessary sooner.
The cartridge is designed to operate at temperatures from 1°C to 52°C. It offers filtration performance of 25 L/min, and the pressure drop is 0.2 - 0.4 bar, which supports efficient system operation even at higher flow rates.
The cartridge service life is up to 6 months or 14000 L. The duration of use depends on the quality and contamination level of the water supplied to the filter.
WodaRO PP5 is made of materials with appropriate approvals, approved by NSF and FDA. The cartridge also has PZH hygienic approvals and a hygienic certificate. An additional advantage is the high rigidity and durability of the construction, which translates into stable operation under typical operating conditions.
The product was manufactured in the EU.
* Depending on the level of contamination in the incoming water.
| Cartridge type | String / sediment cartridge |
|---|---|
| Cartridge height | 10" |
| Cartridge diameter | 2½" |
| Material | Pure polypropylene fiber wound around a filtration core |
| Filtration accuracy | 5 micron |
| Filtration performance | 25 L/min |
| Service life | Up to 6 months or 14000 L* |
| Operating temperature | From 1°C to 52°C |
| Pressure drop | 0.2 - 0.4 bar |
| Compatibility | 10" inline housings, under-sink filters, osmosis and RO systems |
| Certifications and compliance | PZH hygienic approvals, hygienic certificate, materials approved by NSF and FDA |
| Place of manufacture | EU |
It is a mechanical filtration cartridge intended to retain impurities such as sand, silt, or rust. It is used as a pre-filtration stage to protect the water system and the subsequent elements of the filtration system.
Yes, the cartridge has a height of 10" and is intended for standard 10" inline filters. It can also be used in many under-sink and osmosis systems using this format.
The cartridge provides filtration accuracy at the level of 5 micron, which is why it effectively reduces typical mechanical impurities present in water.
Yes, it can operate in RO systems as a reverse osmosis filter at the mechanical pre-filtration stage. It helps protect the subsequent stages used by an osmosis filter or a reverse osmosis system.
The cartridge service life is up to 6 months or 14000 L. In practice, the replacement frequency depends on the contamination level of the incoming water — the more sediment, the faster the cartridge wears out.
The PP5 model is adapted to operate at temperatures from 1°C to 52°C, which makes it suitable for cold and hot water filtration within the permitted operating range.
The density gradient means that larger contaminants are retained closer to the outer layer, while finer ones are captured deeper inside the cartridge. This design improves filtration efficiency and helps extend cartridge service life.
No, one of its advantages is minimal pressure drop at high flow rates. The specification states a pressure drop of 0.2 - 0.4 bar.
Yes, the cartridge has PZH hygienic approvals and a hygienic certificate. It is also made of materials approved by NSF and FDA.
WodaRO PP5 is a universal string filter cartridge 10" for pre-filtration of cold and hot water. Made of pure polypropylene fiber with a precision of 5 microns. It captures mechanical impurities (sand, silt, rust), protecting the installation as well as heating devices and household appliances. Designed for 10" cartridge housings and under-sink and RO systems.