- There are no more items in your cart
- Shipping
- Total 0.00 zł
- Water filters
- Reverse osmosis
- Reverse osmosis systems (filters)
- Osmosis filters
- RO10 filter cartridges
- RO3 filter cartridges
- RO4 filter cartridges
- RO5 filter cartridges
- RO6 filter cartridges
- RO7 filter cartridges
- RO8 filter cartridges
- RO9 filter cartridges
- Reverse osmosis cartridge sets
- Pre-filters for reverse osmosis
- Inline cartridges for reverse osmosis
- Mineralizers for reverse osmosis
- Carbon cartridges for reverse osmosis
- Mechanical cartridges for reverse osmosis
- Osmotic membranes
- Parts and accessories for reverse osmosis
- Water pumps
- Pressure tanks for osmosis
- RO faucets and taps
- Quick connectors for reverse osmosis
- Hoses, filter tubes
- Water valves
- Flow restrictors
- Water connections
- Membrane housings and RO filter housings
- RO filter keys
- RO filter holders
- Mounting plates for osmosis
- Seals for RO systems
- Water leak sensors
- Pressure gauges for reverse osmosis
- RO system disinfection
- Akcesoria do złączek i przewodów RO
- Filter cartridges
- Carbon
- Antibacterial
- To the pitcher, filtering bottle
- Linear
- Mechanical
- Deionizing
- Softening
- Insert sets
- Capillary membranes
- Wkłady do butelek filtrujących
- Wkłady do filtrów prysznicowych
- Wkłady do filtrów nakranowych i nablatowych
- Wkłady do filtrów pod zlew
- Wkłady Big Blue 10"
- Wkłady Big Blue 20"
- Puste wkłady i puszki do zasypu
- Wkłady do filtrów Cintropur
- Wkłady do filtrów urządzeń AGD
- Wkłady do usuwania azotanów
- Water softeners and iron removers
- Water demineralization
- UV bactericidal lamps
- Testers, water meters
- Pool and Spa
- Aquarium filters
- Drinking water devices
- Coffee machines
- Breathalysers
- Accessories, parts, and others
- Batteries, faucets, spouts
- Hydraulic articles
- Septic tank products
- Descaling liquids
- Thermal mugs and bottles
- Others
- Descaling tablets
- Condensate neutralisers for boilers
- Leak protection systems and shut-off valves
- Zestawy podłączeniowe do lodówek i kostkarek
- Parts for inline filter housings and filters
- Technical and service items
- Tabletki do czyszczenia ekspresów
- Odkamieniacze w proszku i saszetkach
- Water problems
- Hard water and limescale
- Iron and rust in water
- Sand and sediment in water
- Chlorine and bad water taste
- Bad water smell
- Bacteria in water
- Cloudy water
- Well water
- High TDS in water
- Dry skin after bathing
- Dry and dull hair after washing
- Stains on shower glass and fittings
- Limescale in the washing machine
- Limescale in coffee machine and kettle
- Rough laundry and stiff towels
- Spots on dishes after dishwasher
- Clogging of aerators
- Limescale in boiler and water heater
- Metallic taste of water
- Yellow tap water
- Brown water after opening the tap
- Black sediment in water
- Manganese in water
- Ammonium in water
- Nitrates and nitrites in water
- Water for baby and child
- Microplastics in water
- Pesticides, medicines and organic compounds
- PFAS in drinking water
- Service & installation
- B2B
ORING SEAL FOR BIG BLUE FILTERS OSMOSIS
OR-N-1524X57
Rating
O-ring (seal) for Big Blue filter housings by Aquafilter with a pressure gauge. It ensures a tight connection between the head and the body, which reduces the risk of leaks and helps maintain the proper operation of the filtration system and osmosis systems. Dimensions: 152.4 mm x 5.7 mm.
Description
An O-ring for Big Blue Aquafilter filters with dimensions of 152.4 x 5.7 mm is a gasket designed for Big Blue housings with a pressure gauge. It ensures a tight connection between the head and the body, helping reduce the risk of leaks and maintain stable operation of the water treatment system. It is a practical consumable component for systems such as a water filter, water filtration system, osmosis filter, and reverse osmosis.
O-ring gasket for Aquafilter Big Blue housings
A properly functioning and correctly fitted gasket is crucial for the safe operation of the filter housing. This O-ring has been designed for Aquafilter Big Blue housings with a pressure gauge and serves an important sealing function between the head and the housing body.
Thanks to its proper dimensions, the gasket supports the tightness of the connection, which translates into a lower risk of leaks and more reliable operation of the entire filtration system. This is especially important in installations where a reverse osmosis filter, reverse osmosis system, or an advanced water filtration system is in use.
Application
The gasket is intended for use in:
- Aquafilter Big Blue housings with a pressure gauge.
It can be used wherever maintaining housing tightness has a direct impact on the proper operation of the installation. This applies both to classic filtration systems and to solutions used in household water treatment.
Key benefits
- ensures a tight connection between the head and the housing body,
- helps reduce the risk of leaks,
- supports proper operation of the filtration system,
- works well in systems based on a water filter and osmosis systems,
- is matched to Aquafilter Big Blue housings with a pressure gauge.
Why does the condition of the gasket matter?
The O-ring is a small component, but it has a very large impact on the operation of the entire filter housing. A worn, flattened, or damaged gasket can lead to sealing problems and, as a result, to leaks and reduced ease of use.
Replacing the gasket with a properly selected model helps restore proper sealing of the connection. This is especially important in installations that operate regularly and are part of a home water treatment system.
Before installation, make sure the gasket is compatible with the Aquafilter Big Blue housing with a pressure gauge. During replacement, it is worth checking the condition of the gasket seat and the contact surfaces of the head and body to ensure proper seating of the O-ring and a tight connection.
Dimensions
- 152.4 mm x 5.7 mm
Additional important information
- 152.4mm x 5.7mm
Technical specification
| Parameter | Value |
|---|---|
| Product type | O-ring / gasket for filter housings |
| Intended use | Aquafilter Big Blue housings with a pressure gauge |
| Function | Tight connection between the head and the body |
| Impact on system operation | Reduction of leak risk and support for proper operation of the filtration system |
| Dimensions | 152.4 mm x 5.7 mm |
Product Details
OR-N-1524X57
975 Items
Data sheet
- Accessory type
- Seal / O-ring
- Application
- Whole house
- Compatibility
- Big Blue
- Product type
- Seal / gasket
Questions
What is this O-ring used for?
The gasket provides a tight connection between the head and the body of the Big Blue housing. This helps reduce the risk of leaks and supports proper operation of the filtration system.
Which housings does this gasket fit?
The model is intended for Aquafilter Big Blue housings with a pressure gauge.
What are the gasket dimensions?
The O-ring dimensions are 152.4 mm x 5.7 mm.
Does the gasket matter for the tightness of a water filter?
Yes. It is one of the basic elements responsible for the tightness of the housing. Its good condition helps prevent leaks and maintain proper operation of the water filtration system.
Can this O-ring be used in osmosis installations?
Yes, the gasket can be used in systems where Big Blue housings are part of the filtration installation, including solutions such as an osmosis filter, reverse osmosis filter, or reverse osmosis system.
When should the O-ring gasket be replaced?
Replacement is recommended when there are signs of wear, deformation, flattening, or problems with housing tightness. Regular inspection of this component helps maintain safe system operation.
What should you pay attention to during installation?
Before installation, check the compatibility of the gasket with the housing, the condition of the gasket seat, and the contact surfaces. Correct seating of the O-ring has a direct impact on the tightness of the connection.
Is this an important component in the ORING GASKET FOR BIG BLUE FILTERS water treatment?
Definitely yes. Even a small gasket has a significant impact on the tightness and reliability of the entire system, so its good condition is important for the efficient operation of the water treatment system.
O-ring (seal) for Big Blue filter housings by Aquafilter with a pressure gauge. It ensures a tight connection between the head and the body, which reduces the risk of leaks and helps maintain the proper operation of the filtration system and osmosis systems. Dimensions: 152.4 mm x 5.7 mm.