- There are no more items in your cart
- Shipping
- Total 0.00 zł
Over 15 years in business
Over 1.5 million satisfied customers
Free shipping
Fast shipping
14-day returns
Technical support
- Water filters
- Reverse osmosis
- Reverse osmosis systems (filters)
- Osmosis filters
- RO10 filter cartridges
- RO3 filter cartridges
- RO4 filter cartridges
- RO5 filter cartridges
- RO6 filter cartridges
- RO7 filter cartridges
- RO8 filter cartridges
- RO9 filter cartridges
- Reverse osmosis cartridge sets
- Pre-filters for reverse osmosis
- Inline cartridges for reverse osmosis
- Mineralizers for reverse osmosis
- Carbon cartridges for reverse osmosis
- Mechanical cartridges for reverse osmosis
- Osmotic membranes
- Parts and accessories for reverse osmosis
- Water pumps
- Pressure tanks for osmosis
- RO faucets and taps
- Quick connectors for reverse osmosis
- Hoses, filter tubes
- Water valves
- Flow restrictors
- Water connections
- Membrane housings and RO filter housings
- RO filter keys
- RO filter holders
- Mounting plates for osmosis
- Seals for RO systems
- Water leak sensors
- Pressure gauges for reverse osmosis
- RO system disinfection
- Akcesoria do złączek i przewodów RO
- Filter cartridges
- Carbon
- Antibacterial
- To the pitcher, filtering bottle
- Linear
- Mechanical
- Deionizing
- Softening
- Insert sets
- Capillary membranes
- Wkłady do butelek filtrujących
- Wkłady do filtrów prysznicowych
- Wkłady do filtrów nakranowych i nablatowych
- Wkłady do filtrów pod zlew
- Wkłady Big Blue 10"
- Wkłady Big Blue 20"
- Puste wkłady i puszki do zasypu
- Wkłady do filtrów Cintropur
- Wkłady do filtrów urządzeń AGD
- Wkłady do usuwania azotanów
- Water softeners and iron removers
- Water demineralization
- UV bactericidal lamps
- Testers, water meters
- Pool and Spa
- Aquarium filters
- Drinking water devices
- Coffee machines
- Breathalysers
- Accessories, parts, and others
- Batteries, faucets, spouts
- Hydraulic articles
- Septic tank products
- Descaling liquids
- Thermal mugs and bottles
- Others
- Descaling tablets
- Condensate neutralisers for boilers
- Leak protection systems and shut-off valves
- Zestawy podłączeniowe do lodówek i kostkarek
- Parts for inline filter housings and filters
- Technical and service items
- Tabletki do czyszczenia ekspresów
- Odkamieniacze w proszku i saszetkach
- Water problems
- Hard water and limescale
- Iron and rust in water
- Sand and sediment in water
- Chlorine and bad water taste
- Bad water smell
- Bacteria in water
- Cloudy water
- Well water
- High TDS in water
- Dry skin after bathing
- Dry and dull hair after washing
- Stains on shower glass and fittings
- Limescale in the washing machine
- Limescale in coffee machine and kettle
- Rough laundry and stiff towels
- Spots on dishes after dishwasher
- Clogging of aerators
- Limescale in boiler and water heater
- Metallic taste of water
- Yellow tap water
- Brown water after opening the tap
- Black sediment in water
- Manganese in water
- Ammonium in water
- Nitrates and nitrites in water
- Water for baby and child
- Microplastics in water
- Pesticides, medicines and organic compounds
- PFAS in drinking water
- Service & installation
- B2B
O-RING SEAL FOR WATER FILTER HOUSING 10 inch
USZCZELKA-10
4027329740703
Rating
O-ring gasket for 10-inch water filter housings, designed for 3-part inline housings where the gasket works in a groove. Helps maintain the seal of the connection and reduces the risk of leaks. The price is for 1 piece. Free: special grease for lubricating gaskets.
Description
The O-ring seal for a 10-inch water filter housing is a practical consumable component designed for 3-piece in-line housings, where the seal works in a groove. It ensures a tight connection between housing elements, helps reduce the risk of leaks, and supports the proper operation of installations such as a water filter, water filtration system, or selected water treatment systems. The product is sold per piece, and the set includes a free special grease for lubricating seals.
Application and purpose
The O-ring has been designed for 10-inch water filter housings in the 3-piece in-line version. It fits housings where the seal is placed in a special groove, allowing it to work properly during tightening and everyday use of the housing.
This is a small but very important sealing component that affects the safety and convenience of the entire filtration system. In practice, it is used both in standard home installations and in systems where a water filter operates as part of a more advanced water treatment setup.
Main benefits
designed for 10-inch 3-piece in-line housings,
fit for housings where the seal is located in a groove,
helps maintain a tight connection,
reduces the risk of leaks,
easy replacement of a worn sealing element,
sold as 1 piece,
free special grease for lubricating seals.
Why does the condition of the seal matter?
In filtration housings, the tightness of the connection is crucial for the correct operation of the entire system. A worn, cracked, or improperly seated O-ring can make it harder to close the housing properly and increase the risk of leaks.
Replacing the seal with the correct model for a 10-inch housing helps maintain proper contact between components and makes further trouble-free use of the unit easier. This matters both in simple in-line installations and where filtration is part of a more advanced solution, for example a reverse osmosis system, an osmosis filter, or another water filtration system.
Before installation, it is worth checking whether the seal is correctly positioned in the groove and whether the contact surfaces are clean. For maintenance and easier seating of the seal, you can use the included special grease for lubricating seals.
Set contents
1 x O-ring seal for 10-inch water filter housing,
free: special grease for lubricating seals.
Use and replacement
The O-ring seal is a consumable item, so its condition should be checked every time the filter housing is serviced. If the housing has been opened repeatedly, the seal has lost elasticity, or there are signs of wear, replacement may help restore proper connection tightness.
Regular inspection of the seal is important wherever a water filter operates in a home, apartment, or small utility installation. This also applies to more advanced water treatment solutions, including systems where a reverse osmosis filter or reverse osmosis system works together with other filter housings.
Technical specifications
| Parametr | Wartość |
|---|---|
| Type of product | O-ring seal |
| Purpose | 10-inch water filter housings |
| Compatibility | 3-piece in-line housings |
| Seal operation | seal working in a groove |
| Function | sealing the connection and helping reduce the risk of leaks |
| Quantity in offer | 1 piece |
| Freebie | special grease for lubricating seals |
FAQ
Which housings does this O-ring fit?Does the price apply to a set or a single piece?Is there any freebie included with the product?What function does the O-ring perform in the filter housing?When is it worth replacing the O-ring seal?Is the grease included in the set useful during installation?Can this O-ring be used in water filtration systems?Does the seal also matter in more advanced installations, such as reverse osmosis?
The seal is designed for 10-inch water filter housings in the 3-piece in-line version, where the O-ring works in a groove.
The price applies to 1 O-ring seal.
Yes. The seal comes with a free special grease for lubricating seals.
The O-ring is responsible for sealing the connection between housing components. It helps maintain tightness and reduce the risk of leaks during filter operation.
Replacement is worth considering when the seal is worn, deformed, cracked, less elastic, or when sealing problems appear after the housing has been closed again.
Yes. The special grease for lubricating seals makes it easier to seat the O-ring and supports its proper operation in the groove while tightening the housing.
Yes, if a compatible 10-inch 3-piece in-line housing is used. Such housings may work independently or as part of a larger water filtration system.
Yes. In any installation where filter housings are used, connection tightness is very important. This also applies when in-line components work with solutions such as reverse osmosis, an osmosis filter, or a reverse osmosis system.
Product Details
USZCZELKA-10
883 Items
Data sheet
- Accessory type
- Seal / O-ring
- Application
- Whole house
- Cartridge length
- 10″
- Product type
- Seal / gasket
O-ring gasket for 10-inch water filter housings, designed for 3-part inline housings where the gasket works in a groove. Helps maintain the seal of the connection and reduces the risk of leaks. The price is for 1 piece. Free: special grease for lubricating gaskets.