METAL MAGIC IRON AND COPPER DEPOSIT REMOVER 1 kg

Effective removal of metal deposits from the pool without draining the shell

Metal Magic has been developed to remove inorganic deposits from the pool floor, pool walls, and pool water. It works on contamination caused by iron, copper, silver, calcium, and other metal compounds. Thanks to its liquid formula, the product can be conveniently distributed through the water circuit without the need to empty the pool.

This solution is especially useful when difficult-to-remove stains, films, or mineral streaks appear on surfaces. The product removes only inorganic deposits, so it is worth assessing the type of dirt before use.

Application of Metal Magic

The product is intended for removing:

• metal deposits,
• iron compound deposits,
• copper compound deposits,
• silver compound deposits,
• calcium deposits,
• other inorganic deposits from water and pool surfaces.

Metal Magic acts on deposits present both in pool water and on the walls and floor of the shell. In addition, it lowers the overall water hardness, which may improve the comfort of further pool system operation.

How does Metal Magic work?

The product removes inorganic deposits by reacting with metal and calcium compounds. Calcium or other metals are crystallized and then trapped in the filter. Once the process is complete, they can be removed by rinsing the filter.

This method allows the pool to be cleaned without aggressive scrubbing of surfaces and without draining the shell. It is a convenient solution for the ongoing maintenance of private and public pools where a quick return to normal use matters.

Main benefits

• removes deposits of iron, copper, silver, calcium, and other metals,
• works without the need to drain the pool,
• removes only inorganic deposits,
• crystallized contaminants are trapped in the filter,
• allows deposits to be removed by rinsing the filter,
• lowers overall water hardness,
• does not damage PVC liner, tiles, chlorinated rubber paints, or stainless steel,
• the pool can be used again after application.

How to distinguish inorganic from organic deposits?

Before using the product, it is worth checking what type of contamination you are dealing with. Metal Magic removes inorganic deposits, so a simple test will help determine whether the product is suitable.

To check this, place a cloth soaked in Metal Magic directly on the stain for 5–10 minutes.

• If the stain lightens, the deposit is inorganic and can be removed with a Metal Magic solution.
• If the stain turns yellow, the deposit is organic and cannot be removed with this product.

Directions for use

To achieve the proper effect, carry out the treatment according to the recommended method of use:

1. Before using the product, adjust the water pH to 7.5.
2. To remove deposits or metals, dose the product at 0.3–0.6 liters per 10 m3 of water.
3. Distribute the product evenly in the water with the filter running.
4. Keep the filtration system running for at least 48 hours.
5. After the entire treatment, rinse the filter.
6. Finally, adjust the water pH.

Material and usage safety

Metal Magic has been formulated to effectively remove deposits while remaining safe for typical materials used in pools. The product does not damage:

• PVC liner,
• tiles,
• chlorinated rubber paints,
• stainless steel.

The pool can be used again immediately after the product is applied.

Hazard statements

• H290 – May be corrosive to metals.
• H314 – Causes severe skin burns and eye damage.
• H318 – Causes serious eye damage.

Technical specification

FAQ