Free delivery in Poland from 200 zł
14 days to return your order
Efficient order processing
Technical support 24/7!
Over 27 years of experience
Filter cartridges
L-PS UST-M sedimentation linear insert
Rating
L-PS UST-M is a linear sedimentation cartridge for mechanical water filtration. It works well as a pre-filter in built-in reverse osmos Read moreShow less
L-PS UST-M is a linear sedimentation cartridge for mechanical water filtration. It works well as a pre-filter in built-in reverse osmosis systems and in aquarium treatment systems. It can also serve as a final filter, protecting the installation from particles from treatment cartridges (e.g., carbon or softening cartridges). 1/4" NPT connection.
Benefits
- Captures sand, sediment and rust particles
- Protects subsequent filtration stages
Specifications
L-PS
In stock
- Cartridge diameter
- 2″
- Cartridge length
- 10″
- Cartridge type
- Sediment
- Connection size
- 1/4″
- Filtration function
- Sediment removal
- Service life
- 6 months
View full specifications
- Maximum working pressure
- 6 bar
- Maximum working temperature
- 40 °C
- Filter media
- Polypropylene
- Minimum working temperature
- 2 °C
- Product type
- Filter cartridge
Description
L-PS UST-M is a linear sediment insert for mechanical water filtration, designed to work as a pre-filter or final filter in compact water treatment systems. It performs well in systems such as reverse osmosis, osmosis filter, aquarium water filtration system, and other setups where protecting installation components against solid particles is important. The 1/4" NPT connection makes the insert easy to use in many popular configurations.
The insert can protect the osmosis membrane and subsequent filtration stages from mechanical contaminants, and at the final stage of the installation it helps capture particles that could escape from other filter media. This is a practical solution for users who want to maintain stable system operation and ensure greater water purity in the system.
Application of the L-PS UST-M insert
L-PS UST-M is a linear mechanical filter, i.e. a sediment insert designed for pre-filtration of water in built-in reverse osmosis filters and in aquarium water treatment systems.
Depending on the installation location, it can operate in two ways. As a pre-filter, it supports the protection of downstream components of the system, especially when the water later reaches more sensitive elements of the setup. As a final filter, it helps protect the water installation from particles of filter media that may pass through from treatment and specialty inserts.
- for built-in reverse osmosis systems,
- for aquarium water treatment systems,
- as a pre-filter in built-in systems,
- as a final filter protecting the installation against particles from treatment inserts,
- for protection against particles originating from carbon inserts,
- for protection against particles from specialty inserts, including softening inserts.
In practice, the insert is used among others in built-in nLine, Water Life and For Life systems.
Why choose a linear sediment insert
Mechanical filtration is one of the basic stages that determines the efficiency of the entire system. A sediment insert helps retain solid contaminants present in the water and reduces the risk of them reaching further parts of the installation.
In systems such as a reverse osmosis filter or an advanced water treatment system, a properly selected water filter can positively affect the overall stability of operation. This is particularly important where successive filtration media and the osmosis membrane operate in the system.
Main benefits
- mechanical water filtration in a compact, linear housing,
- possibility of use as a pre-filter or final filter,
- protection of the installation against particles from other filter inserts,
- application in RO systems and aquarium use,
- 1/4" NPT connection compatible with popular installation solutions,
- help in protecting subsequent stages of water treatment.
Operation and replacement
The replacement frequency depends on the insert's mounting location in the system and on the quality of the supply water. Regular checking of the filter condition helps maintain system efficiency and reduce the risk of decreased filtration performance.
If the filter is installed before the membrane in a built-in system, replacement is recommended after 3 months, but not less often than every 6 months. If the insert works at the final stage of water treatment, it can be replaced no less often than every 12 months.
The service life of the insert depends on the amount and degree of contamination of the feed water.
Where it works best
L-PS UST-M will be a good choice for users who need a simple and effective element for mechanical water purification in linear installations. It can support the operation of a reverse osmosis system, protect an aquarium system, and serve as additional protection for pipes and accessories.
This is a particularly useful solution where limiting the presence of solid particles in water and protecting more sensitive components of the filtration system is important.
Additional important information
- service life* - max 6 (months)
Technical specifications
| Parameter | Value |
|---|---|
| Type | linear sediment insert / mechanical filter |
| Application | pre-filtration of water and final filtration in selected treatment systems |
| Connection | 1/4" NPT |
| Service life | max. 6 months |
| Operating temperature | 2-40 °C |
| Maximum operating pressure | 6 bar |
| Maximum flow rate | 4 l/min |
| Dimensions (L x dia.) | 10" x 2" |
FAQ
What is the L-PS UST-M insert used for?
It is a linear sediment insert designed for mechanical water filtration. It can work as a pre-filter in built-in reverse osmosis systems and as a final filter protecting the installation against particles coming from other filter inserts.
Is this insert suitable for reverse osmosis systems?
Yes. The insert is used for pre-filtration of water in built-in reverse osmosis filters. It can help protect further treatment stages, including the osmosis membrane, from mechanical contaminants.
Can the insert be used in aquariums?
Yes. L-PS UST-M also works well in aquarium water treatment systems where mechanical filtration in a compact, linear form is needed.
How often should the insert installed before the membrane be replaced?
If the insert works before the membrane in a built-in system, replacement is recommended after 3 months, but no less often than every 6 months.
How often should the insert used at the final filtration stage be replaced?
If the filter is located at the final stage of water treatment, the insert can be replaced no less often than every 12 months.
What connection does it have?
The insert is equipped with a 1/4" NPT connection, which allows it to be used in many popular filtration systems and linear installations.
What are the basic operating parameters of this insert?
Maximum service life is up to 6 months. Operating temperature range is 2-40 °C, maximum operating pressure is 6 bar, and maximum flow rate is 4 l/min. The insert dimensions are 10" x 2".
What determines the actual service life of the insert?
Service life depends on the amount and degree of water contamination. The greater the load of mechanical contaminants, the sooner the insert may require replacement.
Łatwy montaż
Wkład jest łatwy do zamontowania, bez problemów.
Dobry wkład sedymentacyjny
Używam do akwarium i jest OK.
Mocna rekomendacja!
Używam od pewnego czasu jako filtr wstępny i sprawdza się bez zarzutu. 5 gwiazdek to jedyna słuszna ocena, ponieważ woda jest czysta i ma przyjemny zapach.
Sprzęt na piątkę!
Nie można złego słowa powiedzieć - usuwa zanieczyszczenia bardzo dobrze.