pH Minus granules for lowering excessively high pH levels in pool water and bringing it to the recommended range of 7.0-7.4. Acidic granules without chlorides, specifically designed for manual dosing in private pools. Dose in portions after dissolving in water, continuously monitoring the pH.
pH Minus granules for lowering swimming pool water pH is a product designed to correct excessively high pH levels in private pools. This acidic, chloride-free granulate helps bring water into the recommended pH range of 7.0-7.4, and thanks to its formula suitable for manual dosing, it allows convenient correction of water parameters in portions, with ongoing control of the effect. It is a practical solution for people who care about bathing comfort and proper pool water treatment.

Maintaining the correct water pH is crucial for everyday pool operation. Excessively high pH can make it harder to maintain the desired water parameters, which is why pH Minus granules were developed to effectively lower pH from an alkaline level to the optimal range of 7.0-7.4.
The product comes in the form of an acidic granulate and does not contain chlorides. This form is suitable for regular pool water care and also allows the product to be stored for a long time while maintaining safe use conditions.
Proper dosing should be carried out gradually to safely and precisely correct the water pH.
Note: in solution form, the product is corrosive. Biocidal products should be used with caution. Read the label and product information before each use. A properly rinsed package is recyclable material.
To make pH correction effective, it is worth carrying it out in stages and avoiding adding a large amount of product at once. Dissolving the granules in water before application makes it easier to distribute the agent evenly throughout the pool basin and allows better control of the result.
Regular pH measurement after each portion of the product helps keep the water within the recommended range of 7.0-7.4. This is especially important when water parameters change dynamically due to intensive pool use or the properties of the supplied water.
The set includes 1 package of pH Minus granules with a capacity of 1 kg.
| Parameter | Value |
|---|---|
| Product name | Granules for reducing pH value |
| Product type | Acidic pH Minus granules |
| Application | Lowering excessively high swimming pool water pH |
| Chloride content | Chloride-free |
| Dosing method | Manual, after предварительного dissolving in water |
| Intended use | Especially for private pools |
| Approximate efficiency | 1.5 kg lowers pH by approx. 0.2 in 100 m3 of water |
| Capacity | 1 kg |
The product is used to lower excessively high swimming pool water pH and bring it into the recommended range of 7.0-7.4.
The recommended range after correction is 7.0-7.4.
Yes, the granules are especially suitable for manual dosing in private pools.
The product should be dosed in smaller portions after first dissolving it in water, and then the solution should be poured into the pool in different places while continuously monitoring the pH.
As a rule of thumb, 1.5 kg of granules is enough to lower the pH by about 0.2 in 100 m3 of pool water. The actual dose also depends on the water hardness.
Yes. Hard water requires a larger dose of the product, while soft water requires a smaller one.
No. The solution should not be poured near metal parts.
The container should always be kept closed. The product comes in the form of an acidic, chloride-free granulate, which supports long-term storage.
Precautionary measures must be observed. In solution form, the product is corrosive, so the label and product information must be read before use.
Kupuję tu regularnie, nigdy się nie zawiodłem.
pH Minus granules for lowering excessively high pH levels in pool water and bringing it to the recommended range of 7.0-7.4. Acidic granules without chlorides, specifically designed for manual dosing in private pools. Dose in portions after dissolving in water, continuously monitoring the pH.