First replacement cartridge for the WodaRO RO600 filter

Sediment cartridge for WodaRO RO600 – the first stage of system protection

The first replacement cartridge for the RO600 water filter, marked as 1 SEDIMENT FILTER, is responsible for the initial removal of solid particles from water. As the first filtration stage in the WodaRO RO600 system, it takes on mechanical contaminants present in both tap water and water from a private well.

Its task is to retain fractions that could reduce the performance of subsequent filtration stages. As a result, the entire reverse osmosis system can operate more stably and effectively, and the next cartridges are better protected against premature wear.

What contaminants does the first filter cartridge remove?

The sediment cartridge is designed to remove mechanical contaminants, meaning fine solid particles present in water. These are deposits that may occur naturally at the intake or enter the installation during distribution.

• sand,
• silt,
• sludge,
• rust,
• suspended solids,
• other fine solid fractions.

Such contaminants are found both in water from private wells and in tap water, into which they can enter, among other ways, during distribution. That is why the first filtration stage is so important for the proper operation of the entire system.

Why is the first filtration stage so important?

In systems such as reverse osmosis or an osmosis filter, pre-filtration plays a key protective role. Before water reaches the next purification stages, it should be cleared of mechanical particles that could reduce the effectiveness of downstream components.

The first replacement cartridge for the WodaRO RO600 filter:

• works as the first filtration stage,
• retains sediment contaminants,
• protects subsequent filtration stages,
• supports proper operation of the RO600 reverse osmosis system,
• helps maintain high efficiency of the entire system.

Cartridge material and construction

The cartridge is made of high-quality foam, i.e. polypropylene nonwoven fabric. The material has been formed to ensure water filtration through the entire structure of the cartridge, which translates into effective capture of mechanical contaminants already at the first stage of the unit's operation.

This design promotes even cartridge performance and efficient capture of deposits present in water from various sources.

Application

This water filter is used in the WodaRO RO600 system as an element responsible for the initial removal of mechanical sediment from water. It is suitable for installations supplied with:

• water from a private well,
• tap water.

In both cases, its task is to capture contaminants that may be present in raw water or enter it during transport through the network and installation.

Technical specifications

FAQ