Water filters
Filter cartridges
Reverse osmosis
Softeners & Iron Filters
Accessories & Parts
Soda makers
Bestsellers
Wholesale
Soda makers
BLOG
Kontakt
Services
PayU
Tips
Aquafilter FCPP10-L is a polypropylene string filter cartridge for LONG 20" housings. It is used for pre-filtration of water and effectively removes mechanical impurities such as sand, silt, or rust, down to 10 microns. The layered construction with increasing density improves sediment retention and protects the installation and household appliances.
FCPP10-L Aquafilter 10 micron LONG 20" cartridge is an efficient filter cartridge for preliminary water filtration, designed for LONG 20" housings. The polypropylene string-wound cartridge effectively traps mechanical impurities such as sand, silt, and rust down to 10 microns, supporting the water filtration system, water treatment, and the protection of installations, fittings, and household appliances. It is a practical water filter used both in residential buildings and in other utility facilities, also as a stage preceding an osmotic filter, reverse osmosis filter, or reverse osmosis system.

Aquafilter FCPP10-L is a universal 20" sediment cartridge made of polypropylene string. It has been designed to operate in LONG-type housings and is responsible for the preliminary purification of water from suspended solids and mechanical sediment. Thanks to its typical and highly practical filtration rating, it is widely used wherever the presence of solid particles in a water installation needs to be reduced.
The cartridge traps all kinds of mechanical impurities up to 10 microns in size, including mainly:
FCPP series polypropylene string-wound cartridges are made of pure polypropylene fiber wound onto a filter core. This design is not accidental — it ensures increasing filter density toward its core, which translates into effective capture of mechanical impurities throughout the entire volume of the cartridge.
The layered structure supports gradual sediment retention and helps maintain high cartridge usability in everyday operation. This solution is particularly valued in installations where stable performance at higher water flow rates matters.
The FCPP10-L model is used mainly for preliminary filtration for a residential building or another utility facility. Its task is to reduce the amount of suspended solids and sediment passing further into the installation and devices using water.
In practice, the cartridge helps protect:
Removing sand, silt, and rust already at the preliminary stage reduces the risk of sediment build-up and limits the possibility of damage to installation components and devices connected to the water supply network. For this reason, the cartridge can be used as an element preceding a more advanced water filtration system, including solutions such as reverse osmosis.
Important: the cartridge is intended for mechanical filtration and is used to remove suspended solids and sediment such as sand, silt, and rust. To maintain effective operation, it should be replaced according to its expected service life or sooner if there is a clear drop in water flow caused by contaminant load.
The Aquafilter FCPP10-L cartridge is intended for standard operation as a preliminary filtration element. The cartridge service life is up to 18 thousand liters or from 3 to 6 months of use. The actual operating period depends on the level of water contamination and the intensity of installation use.
Regular cartridge replacement helps maintain an appropriate level of installation protection and stable operation of the entire filtration system. In the case of water with a higher amount of mechanical sediment, replacement may be needed more frequently.
| Parameter | Value |
|---|---|
| Model | FCPP10-L |
| Product type | String-wound / sediment cartridge |
| Material | Polypropylene fiber |
| Application | Preliminary water filtration in LONG 20" housings |
| Filtration rating | Up to 10 microns |
| Removed impurities | Sand, silt, rust, and other mechanical impurities |
| Dimensions | 510 mm (+/-5 mm) * 57 mm (+/-2 mm) |
| Service life | Up to 18 thousand liters or 3-6 months |
The cartridge is designed for LONG 20" housings. Before purchasing, it is worth making sure that the filter housing complies with this dimensional standard.
It is a cartridge for preliminary filtration whose purpose is to trap mechanical impurities present in water. Thanks to this, it protects the installation and subsequent elements of the water treatment system from sediment.
The cartridge traps mechanical impurities up to 10 microns in size, such as sand, silt, rust, and other similar suspensions and sediment.
Yes, the FCPP10-L model is used mainly for preliminary filtration for a residential building, but it can also be used in other utility facilities.
Yes, this type of mechanical filtration can serve as a stage preceding a reverse osmosis filter, osmotic filter, or a more extensive reverse osmosis system, because it reduces the amount of sediment flowing into subsequent filtration stages.
The expected service life is up to 18 thousand liters or from 3 to 6 months. The usage time depends on water quality and the amount of mechanical impurities retained.
The polypropylene string is wound onto the filter core in such a way that the cartridge density increases toward the center. This design supports effective sediment retention throughout the entire filter structure.
If the water contains a large amount of mechanical sediment and a clear drop in flow appears, the cartridge should be replaced earlier. More frequent replacement may be necessary in installations with more contaminated water.
Aquafilter FCPP10-L is a polypropylene string filter cartridge for LONG 20" housings. It is used for pre-filtration of water and effectively removes mechanical impurities such as sand, silt, or rust, down to 10 microns. The layered construction with increasing density improves sediment retention and protects the installation and household appliances.