FCCEL20-L Aquafilter long 20" pleated filter cartridge

Mechanical pleated cartridge for effective pre-filtration

The Aquafilter FCCEL20-L is designed to remove mechanical impurities from water. This solution is intended for users who want to reduce the presence of solid particles in the system while maintaining good water flow. The pleated, folded design increases the filtration surface area, allowing the cartridge to operate efficiently without causing excessive load on the system.

In practice, this means effective retention of typical contaminants found in cold utility water, such as sand, rust, silt, and other suspended solids. This type of pre-filtration helps protect fittings, appliances, and subsequent stages of water purification.

Key advantages of the Aquafilter FCCEL20-L cartridge

• mechanical cold water filtration,
• effective removal of sand, rust, silt, and suspended solids,
• pleated design increasing the filtration surface area,
• low pressure drop during operation,
• reusable cartridge,
• regenerable and reusable,
• compatible with most 20" LONG filter housings,
• a good solution as pre-filtration in advanced water treatment installations.

What is this cartridge suitable for?

The 20" LONG pleated cartridge is suitable wherever mechanical impurities need to be stopped before further treatment stages. It can operate as a standalone water filter or as a pre-filtration element protecting subsequent installation components.

• in domestic cold water systems,
• in filter housings used for utility water filtration,
• as protection for faucets, valves, and appliances against mechanical deposits,
• as a pre-filtration stage wherever an RO filter, RO membrane, or complete reverse osmosis system is used,
• in installations where effective water treatment before further processing is important.

Why does the pleated design matter?

A pleated cartridge differs from simpler solutions by having a larger active surface area of the filter material. Thanks to this, water has more space to flow through, and the cartridge itself can effectively capture impurities while maintaining a low pressure drop. This is especially important in installations where stable operation and good water use comfort are essential.

An additional advantage is the possibility of regeneration, which allows the service life of the cartridge to be extended under suitable operating conditions. This is a practical option for users looking for a reusable solution for mechanical filtration.

Compatibility and installation

The Aquafilter FCCEL20-L fits most 20" LONG standard filter housings. Before purchase, it is worth making sure that your filter housing is compatible with this size. Proper cartridge fit is crucial for system tightness, correct water flow, and filtration efficiency.

As a mechanical cartridge, it can be used at the system inlet or before more advanced purification solutions where effective pre-filtration is required. This application supports the operation of downstream system components and helps reduce the buildup of contaminants in subsequent stages.

Operation and everyday use

The cartridge has been designed for repeated use. This means that once soiled, it can be regenerated if its technical condition allows. Regular maintenance helps preserve performance and extend the service life of the filtration element.

• use the cartridge only for cold water,
• check the contamination level depending on the quality of the feed water,
• clean the cartridge when you notice sediment buildup or reduced flow,
• replace the cartridge if regeneration does not restore the expected performance,
• keep the filter housing clean during every service operation.

Technical specifications