Free delivery in Poland from 200 zł
14 days to return your order
Efficient order processing
Technical support 24/7!
Over 27 years of experience
Pool chemistry
ANTYCHLOR GRANULE FOR CHLOR DEACTIVATION 1 kg
Rating
Antichlor granules for quickly reducing excessive chlorine levels in pool water. The product dissolves in water and can be dosed direct Read moreShow less
Antichlor granules for quickly reducing excessive chlorine levels in pool water. The product dissolves in water and can be dosed directly into the pool (recommended in portions). It is also effective for neutralizing the entire chlorine content. Packaging: 1 kg.
Specifications
ANTYCHLOR-1KG
In stock
- Application
- Pool / SPA
- Chemical type
- Chlorine neutralizer
- Package weight
- 1 kg
- Product form
- Granules
- Product type
- Pool chemical
Description
ANTYCHLOR GRANULE FOR CHLOR DEACTIVATION 1 kg is a product for rapidly lowering excessively high chlorine levels in pool water. The granules dissolve easily in water and can be dosed directly into the pool in smaller portions, which makes it easier to control the neutralization process. It is a practical solution for ongoing correction of water parameters and for complete chlorine neutralization when needed. The product works wherever effective pool water treatment and convenient handling are important.
Effective neutralization of excess chlorine in pool water
Granular Antychlor was developed for situations in which the chlorine content in swimming pool water is too high and needs to be reduced. The product helps quickly reduce chlorine levels, and if necessary, it can also be used to neutralize the entire chlorine content present in the water.
Thanks to its granular form, the product is convenient to dose and easy to use during standard pool maintenance. It dissolves well in water, allowing for quick preparation and application of the appropriate dose.
Main benefits
- easy to use
- easily soluble
Product application
The product is intended for water in swimming pools when there is a need to reduce excessive chlorine levels. It can be used both for partial lowering of chlorine levels and for complete neutralization.
This is a useful solution in situations where, after chlorination, it is necessary to restore more appropriate water parameters before further use of the pool.
Directions for use
Antychlor dissolves in water, so it can be added directly to the swimming pool. However, it is recommended that the calculated total amount of the product be applied in smaller portions.
Approximate dosage: 0.9 g/m3 of Antychlor destroys approximately 1 g of chlorine.
After each dose, wait about 0.5 hour and then check the chlorine content in the water. This method makes it easier to lower the chlorine level gradually and in a controlled manner without the risk of applying too large a one-time amount of product.
Biocidal products should be used with caution. Read the label and product information before each use.
Disposal instructions
Do not dispose of product residues into the sewage system, for example into a sink or toilet. After emptying, the packaging should be sent for recycling.
Technical specifications
| Product type | Chlorine deactivation granules |
|---|---|
| Application | Lowering excessively high chlorine content in pool water and chlorine neutralization |
| Form | Granules |
| Solubility | The product dissolves in water |
| Dosing method | Can be added directly to the pool; dosing in smaller portions is recommended |
| Approximate dosage | 0.9 g/m3 of the product destroys about 1 g of chlorine |
| Control time after dosing | About 0.5 hour |
| Package | 1 kg |
Questions
What is Antychlor granules 1 kg used for?
The product is used to lower excessively high chlorine levels in pool water. It can also be used for complete neutralization of chlorine present in the water.
Can the product be poured directly into the pool?
Yes. Antychlor dissolves in water and can be added directly to the swimming pool. However, it is recommended to apply the calculated amount in smaller portions.
How should Antychlor be dosed?
As a guideline, 0.9 g/m3 of Antychlor destroys about 1 g of chlorine. After each dose, it is advisable to wait about 0.5 hour and check the chlorine content in the water before adding another portion.
Why is it worth dosing the product in portions?
Dosing in smaller portions makes it easier to control the chlorine neutralization process. This allows you to check the chlorine level on an ongoing basis and adjust the amount of product to actual needs.
Is this granules product easy to use?
Yes. The main advantages of the product include ease of use and good solubility in water, which translates into convenient handling during pool maintenance.
When should the chlorine level be checked after using the product?
After each dose, wait about 0.5 hour and then check the chlorine content in the water. This allows you to assess the effectiveness and decide whether another portion is needed.
How should product residues and the packaging be handled?
Do not dispose of product residues into the sewage system, for example into a sink or toilet. The emptied packaging should be sent for recycling.
What is the package capacity?
The package contains 1 kg of granulated product.