• PayU

    PayU
A4UE4-W angle connector elbow 1/4T x 1/4T | MojaWoda.com
  • A4UE4-W angle connector elbow 1/4T x 1/4T | MojaWoda.com

A4UE4-W angled connector elbow 1/4T x 1/4T

Rating 

A4UE4-W elbow 2 x 1/4" for tubing for under-sink water treatment systems, including RO. The angled connector allows for the connection of two 1/4" hoses using the push-fit method: simply push the tubing in until it stops, without twisting and without Teflon tape. It helps to guide the hose close to the wall and aesthetically make bends.

3.50 zł
Tax included Delivery within 1–2 business days
Quantity
In stock

Ask about product

Zapytaj o produkt

A4UE4-W angled connector elbow 1/4T x 1/4T

A4UE4-W angled connector elbow 1/4T x 1/4T

A4UE4-W elbow 2 x 1/4" for tubing for under-sink water treatment systems, including RO. The angled connector allows for the connection of two 1/4" hoses using the push-fit method: simply push the tubing in until it stops, without twisting and without Teflon tape. It helps to guide the hose close to the wall and aesthetically make bends.

I accept privacy policy rules*  

* Pola wymagane

Description

Elbow 2 x 1/4" for tubing.

Used in under-sink water treatment systems, including reverse osmosis systems. The hose connection is made by pushing it firmly into the fitting, without the need for additional tightening or sealing with Teflon tape. A4UE4-W allows for an angled connection of two hoses.

It is useful in situations where there is a need to route the hose, e.g., around the kitchen (from the filter under the sink to the refrigerator) - in corners, the hose itself does not allow for precise routing (too little flexibility). The elbow allows for routing the hose as close to the wall as possible. Another application is connecting linear filters of the "-Q" standard ending with a 1/4 inch plug.

Product Details

Write your review

A4UE4-W angled connector elbow 1/4T x 1/4T

A4UE4-W angled connector elbow 1/4T x 1/4T

A4UE4-W elbow 2 x 1/4" for tubing for under-sink water treatment systems, including RO. The angled connector allows for the connection of two 1/4" hoses using the push-fit method: simply push the tubing in until it stops, without twisting and without Teflon tape. It helps to guide the hose close to the wall and aesthetically make bends.